From e2307e04bbc004f580f5de8a5c04a6210f0c06d2 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 8 Dec 2025 22:10:14 +0300 Subject: [niri] Autogenerated config --- .config/niri/config.kdl | 623 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 623 insertions(+) create mode 100644 .config/niri/config.kdl (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl new file mode 100644 index 0000000..0af16c7 --- /dev/null +++ b/.config/niri/config.kdl @@ -0,0 +1,623 @@ +// This config is in the KDL format: https://kdl.dev +// "/-" comments out the following node. +// Check the wiki for a full description of the configuration: +// https://yalter.github.io/niri/Configuration:-Introduction + +// Input device configuration. +// Find the full list of options on the wiki: +// https://yalter.github.io/niri/Configuration:-Input +input { + keyboard { + xkb { + // You can set rules, model, layout, variant and options. + // For more information, see xkeyboard-config(7). + + // For example: + // layout "us,ru" + // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps" + + // If this section is empty, niri will fetch xkb settings + // from org.freedesktop.locale1. You can control these using + // localectl set-x11-keymap. + } + + // Enable numlock on startup, omitting this setting disables it. + numlock + } + + // Next sections include libinput settings. + // Omitting settings disables them, or leaves them at their default values. + // All commented-out settings here are examples, not defaults. + touchpad { + // off + tap + // dwt + // dwtp + // drag false + // drag-lock + natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "two-finger" + // disabled-on-external-mouse + } + + mouse { + // off + // natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "no-scroll" + } + + trackpoint { + // off + // natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "on-button-down" + // scroll-button 273 + // scroll-button-lock + // middle-emulation + } + + // Uncomment this to make the mouse warp to the center of newly focused windows. + // warp-mouse-to-focus + + // Focus windows and outputs automatically when moving the mouse into them. + // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen. + // focus-follows-mouse max-scroll-amount="0%" +} + +// You can configure outputs by their name, which you can find +// by running `niri msg outputs` while inside a niri instance. +// The built-in laptop monitor is usually called "eDP-1". +// Find more information on the wiki: +// https://yalter.github.io/niri/Configuration:-Outputs +// Remember to uncomment the node by removing "/-"! +/-output "eDP-1" { + // Uncomment this line to disable this output. + // off + + // Resolution and, optionally, refresh rate of the output. + // The format is "x" or "x@". + // If the refresh rate is omitted, niri will pick the highest refresh rate + // for the resolution. + // If the mode is omitted altogether or is invalid, niri will pick one automatically. + // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes. + mode "1920x1080@120.030" + + // You can use integer or fractional scale, for example use 1.5 for 150% scale. + scale 2 + + // Transform allows to rotate the output counter-clockwise, valid values are: + // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270. + transform "normal" + + // Position of the output in the global coordinate space. + // This affects directional monitor actions like "focus-monitor-left", and cursor movement. + // The cursor can only move between directly adjacent outputs. + // Output scale and rotation has to be taken into account for positioning: + // outputs are sized in logical, or scaled, pixels. + // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080, + // so to put another output directly adjacent to it on the right, set its x to 1920. + // If the position is unset or results in an overlap, the output is instead placed + // automatically. + position x=1280 y=0 +} + +// Settings that influence how windows are positioned and sized. +// Find more information on the wiki: +// https://yalter.github.io/niri/Configuration:-Layout +layout { + // Set gaps around windows in logical pixels. + gaps 16 + + // When to center a column when changing focus, options are: + // - "never", default behavior, focusing an off-screen column will keep at the left + // or right edge of the screen. + // - "always", the focused column will always be centered. + // - "on-overflow", focusing a column will center it if it doesn't fit + // together with the previously focused column. + center-focused-column "never" + + // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between. + preset-column-widths { + // Proportion sets the width as a fraction of the output width, taking gaps into account. + // For example, you can perfectly fit four windows sized "proportion 0.25" on an output. + // The default preset widths are 1/3, 1/2 and 2/3 of the output. + proportion 0.33333 + proportion 0.5 + proportion 0.66667 + + // Fixed sets the width in logical pixels exactly. + // fixed 1920 + } + + // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between. + // preset-window-heights { } + + // You can change the default width of the new windows. + default-column-width { proportion 0.5; } + // If you leave the brackets empty, the windows themselves will decide their initial width. + // default-column-width {} + + // By default focus ring and border are rendered as a solid background rectangle + // behind windows. That is, they will show up through semitransparent windows. + // This is because windows using client-side decorations can have an arbitrary shape. + // + // If you don't like that, you should uncomment `prefer-no-csd` below. + // Niri will draw focus ring and border *around* windows that agree to omit their + // client-side decorations. + // + // Alternatively, you can override it with a window rule called + // `draw-border-with-background`. + + // You can change how the focus ring looks. + focus-ring { + // Uncomment this line to disable the focus ring. + // off + + // How many logical pixels the ring extends out from the windows. + width 4 + + // Colors can be set in a variety of ways: + // - CSS named colors: "red" + // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa" + // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others. + + // Color of the ring on the active monitor. + active-color "#7fc8ff" + + // Color of the ring on inactive monitors. + // + // The focus ring only draws around the active window, so the only place + // where you can see its inactive-color is on other monitors. + inactive-color "#505050" + + // You can also use gradients. They take precedence over solid colors. + // Gradients are rendered the same as CSS linear-gradient(angle, from, to). + // The angle is the same as in linear-gradient, and is optional, + // defaulting to 180 (top-to-bottom gradient). + // You can use any CSS linear-gradient tool on the web to set these up. + // Changing the color space is also supported, check the wiki for more info. + // + // active-gradient from="#80c8ff" to="#c7ff7f" angle=45 + + // You can also color the gradient relative to the entire view + // of the workspace, rather than relative to just the window itself. + // To do that, set relative-to="workspace-view". + // + // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view" + } + + // You can also add a border. It's similar to the focus ring, but always visible. + border { + // The settings are the same as for the focus ring. + // If you enable the border, you probably want to disable the focus ring. + off + + width 4 + active-color "#ffc87f" + inactive-color "#505050" + + // Color of the border around windows that request your attention. + urgent-color "#9b0000" + + // Gradients can use a few different interpolation color spaces. + // For example, this is a pastel rainbow gradient via in="oklch longer hue". + // + // active-gradient from="#e5989b" to="#ffb4a2" angle=45 relative-to="workspace-view" in="oklch longer hue" + + // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view" + } + + // You can enable drop shadows for windows. + shadow { + // Uncomment the next line to enable shadows. + // on + + // By default, the shadow draws only around its window, and not behind it. + // Uncomment this setting to make the shadow draw behind its window. + // + // Note that niri has no way of knowing about the CSD window corner + // radius. It has to assume that windows have square corners, leading to + // shadow artifacts inside the CSD rounded corners. This setting fixes + // those artifacts. + // + // However, instead you may want to set prefer-no-csd and/or + // geometry-corner-radius. Then, niri will know the corner radius and + // draw the shadow correctly, without having to draw it behind the + // window. These will also remove client-side shadows if the window + // draws any. + // + // draw-behind-window true + + // You can change how shadows look. The values below are in logical + // pixels and match the CSS box-shadow properties. + + // Softness controls the shadow blur radius. + softness 30 + + // Spread expands the shadow. + spread 5 + + // Offset moves the shadow relative to the window. + offset x=0 y=5 + + // You can also change the shadow color and opacity. + color "#0007" + } + + // Struts shrink the area occupied by windows, similarly to layer-shell panels. + // You can think of them as a kind of outer gaps. They are set in logical pixels. + // Left and right struts will cause the next window to the side to always be visible. + // Top and bottom struts will simply add outer gaps in addition to the area occupied by + // layer-shell panels and regular gaps. + struts { + // left 64 + // right 64 + // top 64 + // bottom 64 + } +} + +// Add lines like this to spawn processes at startup. +// Note that running niri as a session supports xdg-desktop-autostart, +// which may be more convenient to use. +// See the binds section below for more spawn examples. + +// This line starts waybar, a commonly used bar for Wayland compositors. +spawn-at-startup "waybar" + +// To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: +// spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" + +hotkey-overlay { + // Uncomment this line to disable the "Important Hotkeys" pop-up at startup. + // skip-at-startup +} + +// Uncomment this line to ask the clients to omit their client-side decorations if possible. +// If the client will specifically ask for CSD, the request will be honored. +// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners. +// This option will also fix border/focus ring drawing behind some semitransparent windows. +// After enabling or disabling this, you need to restart the apps for this to take effect. +// prefer-no-csd + +// You can change the path where screenshots are saved. +// A ~ at the front will be expanded to the home directory. +// The path is formatted with strftime(3) to give you the screenshot date and time. +screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png" + +// You can also set this to null to disable saving screenshots to disk. +// screenshot-path null + +// Animation settings. +// The wiki explains how to configure individual animations: +// https://yalter.github.io/niri/Configuration:-Animations +animations { + // Uncomment to turn off all animations. + // off + + // Slow down all animations by this factor. Values below 1 speed them up instead. + // slowdown 3.0 +} + +// Window rules let you adjust behavior for individual windows. +// Find more information on the wiki: +// https://yalter.github.io/niri/Configuration:-Window-Rules + +// Work around WezTerm's initial configure bug +// by setting an empty default-column-width. +window-rule { + // This regular expression is intentionally made as specific as possible, + // since this is the default config, and we want no false positives. + // You can get away with just app-id="wezterm" if you want. + match app-id=r#"^org\.wezfurlong\.wezterm$"# + default-column-width {} +} + +// Open the Firefox picture-in-picture player as floating by default. +window-rule { + // This app-id regular expression will work for both: + // - host Firefox (app-id is "firefox") + // - Flatpak Firefox (app-id is "org.mozilla.firefox") + match app-id=r#"firefox$"# title="^Picture-in-Picture$" + open-floating true +} + +// Example: block out two password managers from screen capture. +// (This example rule is commented out with a "/-" in front.) +/-window-rule { + match app-id=r#"^org\.keepassxc\.KeePassXC$"# + match app-id=r#"^org\.gnome\.World\.Secrets$"# + + block-out-from "screen-capture" + + // Use this instead if you want them visible on third-party screenshot tools. + // block-out-from "screencast" +} + +// Example: enable rounded corners for all windows. +// (This example rule is commented out with a "/-" in front.) +/-window-rule { + geometry-corner-radius 12 + clip-to-geometry true +} + +binds { + // Keys consist of modifiers separated by + signs, followed by an XKB key name + // in the end. To find an XKB name for a particular key, you may use a program + // like wev. + // + // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt + // when running as a winit window. + // + // Most actions that you can bind here can also be invoked programmatically with + // `niri msg action do-something`. + + // Mod-Shift-/, which is usually the same as Mod-?, + // shows a list of important hotkeys. + Mod+Shift+Slash { show-hotkey-overlay; } + + // Suggested binds for running programs: terminal, app launcher, screen locker. + Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; } + Mod+D hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; } + Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; } + + // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc. + // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`. + // For example, this is a standard bind to toggle the screen reader (orca). + Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; } + + // Example volume keys mappings for PipeWire & WirePlumber. + // The allow-when-locked=true property makes them work even when the session is locked. + // Using spawn-sh allows to pass multiple arguments together with the command. + // "-l 1.0" limits the volume to 100%. + XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+ -l 1.0"; } + XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; } + XF86AudioMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; } + XF86AudioMicMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; } + + // Example media keys mapping using playerctl. + // This will work with any MPRIS-enabled media player. + XF86AudioPlay allow-when-locked=true { spawn-sh "playerctl play-pause"; } + XF86AudioStop allow-when-locked=true { spawn-sh "playerctl stop"; } + XF86AudioPrev allow-when-locked=true { spawn-sh "playerctl previous"; } + XF86AudioNext allow-when-locked=true { spawn-sh "playerctl next"; } + + // Example brightness key mappings for brightnessctl. + // You can use regular spawn with multiple arguments too (to avoid going through "sh"), + // but you need to manually put each argument in separate "" quotes. + XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; } + XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; } + + // Open/close the Overview: a zoomed-out view of workspaces and windows. + // You can also move the mouse into the top-left hot corner, + // or do a four-finger swipe up on a touchpad. + Mod+O repeat=false { toggle-overview; } + + Mod+Q repeat=false { close-window; } + + Mod+Left { focus-column-left; } + Mod+Down { focus-window-down; } + Mod+Up { focus-window-up; } + Mod+Right { focus-column-right; } + Mod+H { focus-column-left; } + Mod+J { focus-window-down; } + Mod+K { focus-window-up; } + Mod+L { focus-column-right; } + + Mod+Ctrl+Left { move-column-left; } + Mod+Ctrl+Down { move-window-down; } + Mod+Ctrl+Up { move-window-up; } + Mod+Ctrl+Right { move-column-right; } + Mod+Ctrl+H { move-column-left; } + Mod+Ctrl+J { move-window-down; } + Mod+Ctrl+K { move-window-up; } + Mod+Ctrl+L { move-column-right; } + + // Alternative commands that move across workspaces when reaching + // the first or last window in a column. + // Mod+J { focus-window-or-workspace-down; } + // Mod+K { focus-window-or-workspace-up; } + // Mod+Ctrl+J { move-window-down-or-to-workspace-down; } + // Mod+Ctrl+K { move-window-up-or-to-workspace-up; } + + Mod+Home { focus-column-first; } + Mod+End { focus-column-last; } + Mod+Ctrl+Home { move-column-to-first; } + Mod+Ctrl+End { move-column-to-last; } + + Mod+Shift+Left { focus-monitor-left; } + Mod+Shift+Down { focus-monitor-down; } + Mod+Shift+Up { focus-monitor-up; } + Mod+Shift+Right { focus-monitor-right; } + Mod+Shift+H { focus-monitor-left; } + Mod+Shift+J { focus-monitor-down; } + Mod+Shift+K { focus-monitor-up; } + Mod+Shift+L { focus-monitor-right; } + + Mod+Shift+Ctrl+Left { move-column-to-monitor-left; } + Mod+Shift+Ctrl+Down { move-column-to-monitor-down; } + Mod+Shift+Ctrl+Up { move-column-to-monitor-up; } + Mod+Shift+Ctrl+Right { move-column-to-monitor-right; } + Mod+Shift+Ctrl+H { move-column-to-monitor-left; } + Mod+Shift+Ctrl+J { move-column-to-monitor-down; } + Mod+Shift+Ctrl+K { move-column-to-monitor-up; } + Mod+Shift+Ctrl+L { move-column-to-monitor-right; } + + // Alternatively, there are commands to move just a single window: + // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; } + // ... + + // And you can also move a whole workspace to another monitor: + // Mod+Shift+Ctrl+Left { move-workspace-to-monitor-left; } + // ... + + Mod+Page_Down { focus-workspace-down; } + Mod+Page_Up { focus-workspace-up; } + Mod+U { focus-workspace-down; } + Mod+I { focus-workspace-up; } + Mod+Ctrl+Page_Down { move-column-to-workspace-down; } + Mod+Ctrl+Page_Up { move-column-to-workspace-up; } + Mod+Ctrl+U { move-column-to-workspace-down; } + Mod+Ctrl+I { move-column-to-workspace-up; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+Page_Down { move-window-to-workspace-down; } + // ... + + Mod+Shift+Page_Down { move-workspace-down; } + Mod+Shift+Page_Up { move-workspace-up; } + Mod+Shift+U { move-workspace-down; } + Mod+Shift+I { move-workspace-up; } + + // You can bind mouse wheel scroll ticks using the following syntax. + // These binds will change direction based on the natural-scroll setting. + // + // To avoid scrolling through workspaces really fast, you can use + // the cooldown-ms property. The bind will be rate-limited to this value. + // You can set a cooldown on any bind, but it's most useful for the wheel. + Mod+WheelScrollDown cooldown-ms=150 { focus-workspace-down; } + Mod+WheelScrollUp cooldown-ms=150 { focus-workspace-up; } + Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; } + Mod+Ctrl+WheelScrollUp cooldown-ms=150 { move-column-to-workspace-up; } + + Mod+WheelScrollRight { focus-column-right; } + Mod+WheelScrollLeft { focus-column-left; } + Mod+Ctrl+WheelScrollRight { move-column-right; } + Mod+Ctrl+WheelScrollLeft { move-column-left; } + + // Usually scrolling up and down with Shift in applications results in + // horizontal scrolling; these binds replicate that. + Mod+Shift+WheelScrollDown { focus-column-right; } + Mod+Shift+WheelScrollUp { focus-column-left; } + Mod+Ctrl+Shift+WheelScrollDown { move-column-right; } + Mod+Ctrl+Shift+WheelScrollUp { move-column-left; } + + // Similarly, you can bind touchpad scroll "ticks". + // Touchpad scrolling is continuous, so for these binds it is split into + // discrete intervals. + // These binds are also affected by touchpad's natural-scroll, so these + // example binds are "inverted", since we have natural-scroll enabled for + // touchpads by default. + // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; } + // Mod+TouchpadScrollUp { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; } + + // You can refer to workspaces by index. However, keep in mind that + // niri is a dynamic workspace system, so these commands are kind of + // "best effort". Trying to refer to a workspace index bigger than + // the current workspace count will instead refer to the bottommost + // (empty) workspace. + // + // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on + // will all refer to the 3rd workspace. + Mod+1 { focus-workspace 1; } + Mod+2 { focus-workspace 2; } + Mod+3 { focus-workspace 3; } + Mod+4 { focus-workspace 4; } + Mod+5 { focus-workspace 5; } + Mod+6 { focus-workspace 6; } + Mod+7 { focus-workspace 7; } + Mod+8 { focus-workspace 8; } + Mod+9 { focus-workspace 9; } + Mod+Ctrl+1 { move-column-to-workspace 1; } + Mod+Ctrl+2 { move-column-to-workspace 2; } + Mod+Ctrl+3 { move-column-to-workspace 3; } + Mod+Ctrl+4 { move-column-to-workspace 4; } + Mod+Ctrl+5 { move-column-to-workspace 5; } + Mod+Ctrl+6 { move-column-to-workspace 6; } + Mod+Ctrl+7 { move-column-to-workspace 7; } + Mod+Ctrl+8 { move-column-to-workspace 8; } + Mod+Ctrl+9 { move-column-to-workspace 9; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+1 { move-window-to-workspace 1; } + + // Switches focus between the current and the previous workspace. + // Mod+Tab { focus-workspace-previous; } + + // The following binds move the focused window in and out of a column. + // If the window is alone, they will consume it into the nearby column to the side. + // If the window is already in a column, they will expel it out. + Mod+BracketLeft { consume-or-expel-window-left; } + Mod+BracketRight { consume-or-expel-window-right; } + + // Consume one window from the right to the bottom of the focused column. + Mod+Comma { consume-window-into-column; } + // Expel the bottom window from the focused column to the right. + Mod+Period { expel-window-from-column; } + + Mod+R { switch-preset-column-width; } + // Cycling through the presets in reverse order is also possible. + // Mod+R { switch-preset-column-width-back; } + Mod+Shift+R { switch-preset-window-height; } + Mod+Ctrl+R { reset-window-height; } + Mod+F { maximize-column; } + Mod+Shift+F { fullscreen-window; } + + // Expand the focused column to space not taken up by other fully visible columns. + // Makes the column "fill the rest of the space". + Mod+Ctrl+F { expand-column-to-available-width; } + + Mod+C { center-column; } + + // Center all fully visible columns on screen. + Mod+Ctrl+C { center-visible-columns; } + + // Finer width adjustments. + // This command can also: + // * set width in pixels: "1000" + // * adjust width in pixels: "-5" or "+5" + // * set width as a percentage of screen width: "25%" + // * adjust width as a percentage of screen width: "-10%" or "+10%" + // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0, + // set-column-width "100" will make the column occupy 200 physical screen pixels. + Mod+Minus { set-column-width "-10%"; } + Mod+Equal { set-column-width "+10%"; } + + // Finer height adjustments when in column with other windows. + Mod+Shift+Minus { set-window-height "-10%"; } + Mod+Shift+Equal { set-window-height "+10%"; } + + // Move the focused window between the floating and the tiling layout. + Mod+V { toggle-window-floating; } + Mod+Shift+V { switch-focus-between-floating-and-tiling; } + + // Toggle tabbed column display mode. + // Windows in this column will appear as vertical tabs, + // rather than stacked on top of each other. + Mod+W { toggle-column-tabbed-display; } + + // Actions to switch layouts. + // Note: if you uncomment these, make sure you do NOT have + // a matching layout switch hotkey configured in xkb options above. + // Having both at once on the same hotkey will break the switching, + // since it will switch twice upon pressing the hotkey (once by xkb, once by niri). + // Mod+Space { switch-layout "next"; } + // Mod+Shift+Space { switch-layout "prev"; } + + Print { screenshot; } + Ctrl+Print { screenshot-screen; } + Alt+Print { screenshot-window; } + + // Applications such as remote-desktop clients and software KVM switches may + // request that niri stops processing the keyboard shortcuts defined here + // so they may, for example, forward the key presses as-is to a remote machine. + // It's a good idea to bind an escape hatch to toggle the inhibitor, + // so a buggy application can't hold your session hostage. + // + // The allow-inhibiting=false property can be applied to other binds as well, + // which ensures niri always processes them, even when an inhibitor is active. + Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; } + + // The quit action will show a confirmation dialog to avoid accidental exits. + Mod+Shift+E { quit; } + Ctrl+Alt+Delete { quit; } + + // Powers off the monitors. To turn them back on, do any input like + // moving the mouse or pressing any other key. + Mod+Shift+P { power-off-monitors; } +} -- cgit v1.3 From 01e22bedfb2273bff8667e51333127401ab25647 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 8 Dec 2025 22:15:31 +0300 Subject: [niri] Setup mouse --- .config/niri/config.kdl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 0af16c7..25a6d69 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -45,8 +45,8 @@ input { mouse { // off // natural-scroll - // accel-speed 0.2 - // accel-profile "flat" + accel-speed -0.3 + accel-profile "flat" // scroll-method "no-scroll" } -- cgit v1.3 From 9877a3d3101a3bfd1adc6b010160603cef7cf554 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 8 Dec 2025 22:44:09 +0300 Subject: [niri] Setup keyboard --- .config/niri/config.kdl | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 25a6d69..2583fe8 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -12,9 +12,8 @@ input { // You can set rules, model, layout, variant and options. // For more information, see xkeyboard-config(7). - // For example: - // layout "us,ru" - // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps" + layout "us,ru" + options "grp:win_space_toggle,caps:escape" // If this section is empty, niri will fetch xkb settings // from org.freedesktop.locale1. You can control these using @@ -23,6 +22,7 @@ input { // Enable numlock on startup, omitting this setting disables it. numlock + track-layout "window" } // Next sections include libinput settings. -- cgit v1.3 From bddf31d3aeab20782b443f2be98c957e57d90e75 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 8 Dec 2025 23:30:48 +0300 Subject: [niri] Set cursor theme --- .config/niri/config.kdl | 4 ++++ 1 file changed, 4 insertions(+) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 2583fe8..f557175 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -621,3 +621,7 @@ binds { // moving the mouse or pressing any other key. Mod+Shift+P { power-off-monitors; } } + +cursor { + xcursor-theme "breeze_cursors" +} -- cgit v1.3 From d659eb4c3003a12daac7094e65a74f017d519ca9 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 8 Dec 2025 23:42:01 +0300 Subject: [niri] split config into separate files --- .config/niri/binds.kdl | 276 +++++++++++++++++++++++++ .config/niri/config.kdl | 536 +----------------------------------------------- .config/niri/input.kdl | 66 ++++++ .config/niri/layout.kdl | 156 ++++++++++++++ .config/niri/output.kdl | 37 ++++ 5 files changed, 539 insertions(+), 532 deletions(-) create mode 100644 .config/niri/binds.kdl create mode 100644 .config/niri/input.kdl create mode 100644 .config/niri/layout.kdl create mode 100644 .config/niri/output.kdl (limited to '.config/niri/config.kdl') diff --git a/.config/niri/binds.kdl b/.config/niri/binds.kdl new file mode 100644 index 0000000..4a641e6 --- /dev/null +++ b/.config/niri/binds.kdl @@ -0,0 +1,276 @@ +binds { + // Keys consist of modifiers separated by + signs, followed by an XKB key name + // in the end. To find an XKB name for a particular key, you may use a program + // like wev. + // + // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt + // when running as a winit window. + // + // Most actions that you can bind here can also be invoked programmatically with + // `niri msg action do-something`. + + // Mod-Shift-/, which is usually the same as Mod-?, + // shows a list of important hotkeys. + Mod+Shift+Slash { show-hotkey-overlay; } + + // Suggested binds for running programs: terminal, app launcher, screen locker. + Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; } + Mod+D hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; } + Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; } + + // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc. + // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`. + // For example, this is a standard bind to toggle the screen reader (orca). + Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; } + + // Example volume keys mappings for PipeWire & WirePlumber. + // The allow-when-locked=true property makes them work even when the session is locked. + // Using spawn-sh allows to pass multiple arguments together with the command. + // "-l 1.0" limits the volume to 100%. + XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+ -l 1.0"; } + XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; } + XF86AudioMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; } + XF86AudioMicMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; } + + // Example media keys mapping using playerctl. + // This will work with any MPRIS-enabled media player. + XF86AudioPlay allow-when-locked=true { spawn-sh "playerctl play-pause"; } + XF86AudioStop allow-when-locked=true { spawn-sh "playerctl stop"; } + XF86AudioPrev allow-when-locked=true { spawn-sh "playerctl previous"; } + XF86AudioNext allow-when-locked=true { spawn-sh "playerctl next"; } + + // Example brightness key mappings for brightnessctl. + // You can use regular spawn with multiple arguments too (to avoid going through "sh"), + // but you need to manually put each argument in separate "" quotes. + XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; } + XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; } + + // Open/close the Overview: a zoomed-out view of workspaces and windows. + // You can also move the mouse into the top-left hot corner, + // or do a four-finger swipe up on a touchpad. + Mod+O repeat=false { toggle-overview; } + + Mod+Q repeat=false { close-window; } + + Mod+Left { focus-column-left; } + Mod+Down { focus-window-down; } + Mod+Up { focus-window-up; } + Mod+Right { focus-column-right; } + Mod+H { focus-column-left; } + Mod+J { focus-window-down; } + Mod+K { focus-window-up; } + Mod+L { focus-column-right; } + + Mod+Ctrl+Left { move-column-left; } + Mod+Ctrl+Down { move-window-down; } + Mod+Ctrl+Up { move-window-up; } + Mod+Ctrl+Right { move-column-right; } + Mod+Ctrl+H { move-column-left; } + Mod+Ctrl+J { move-window-down; } + Mod+Ctrl+K { move-window-up; } + Mod+Ctrl+L { move-column-right; } + + // Alternative commands that move across workspaces when reaching + // the first or last window in a column. + // Mod+J { focus-window-or-workspace-down; } + // Mod+K { focus-window-or-workspace-up; } + // Mod+Ctrl+J { move-window-down-or-to-workspace-down; } + // Mod+Ctrl+K { move-window-up-or-to-workspace-up; } + + Mod+Home { focus-column-first; } + Mod+End { focus-column-last; } + Mod+Ctrl+Home { move-column-to-first; } + Mod+Ctrl+End { move-column-to-last; } + + Mod+Shift+Left { focus-monitor-left; } + Mod+Shift+Down { focus-monitor-down; } + Mod+Shift+Up { focus-monitor-up; } + Mod+Shift+Right { focus-monitor-right; } + Mod+Shift+H { focus-monitor-left; } + Mod+Shift+J { focus-monitor-down; } + Mod+Shift+K { focus-monitor-up; } + Mod+Shift+L { focus-monitor-right; } + + Mod+Shift+Ctrl+Left { move-column-to-monitor-left; } + Mod+Shift+Ctrl+Down { move-column-to-monitor-down; } + Mod+Shift+Ctrl+Up { move-column-to-monitor-up; } + Mod+Shift+Ctrl+Right { move-column-to-monitor-right; } + Mod+Shift+Ctrl+H { move-column-to-monitor-left; } + Mod+Shift+Ctrl+J { move-column-to-monitor-down; } + Mod+Shift+Ctrl+K { move-column-to-monitor-up; } + Mod+Shift+Ctrl+L { move-column-to-monitor-right; } + + // Alternatively, there are commands to move just a single window: + // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; } + // ... + + // And you can also move a whole workspace to another monitor: + // Mod+Shift+Ctrl+Left { move-workspace-to-monitor-left; } + // ... + + Mod+Page_Down { focus-workspace-down; } + Mod+Page_Up { focus-workspace-up; } + Mod+U { focus-workspace-down; } + Mod+I { focus-workspace-up; } + Mod+Ctrl+Page_Down { move-column-to-workspace-down; } + Mod+Ctrl+Page_Up { move-column-to-workspace-up; } + Mod+Ctrl+U { move-column-to-workspace-down; } + Mod+Ctrl+I { move-column-to-workspace-up; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+Page_Down { move-window-to-workspace-down; } + // ... + + Mod+Shift+Page_Down { move-workspace-down; } + Mod+Shift+Page_Up { move-workspace-up; } + Mod+Shift+U { move-workspace-down; } + Mod+Shift+I { move-workspace-up; } + + // You can bind mouse wheel scroll ticks using the following syntax. + // These binds will change direction based on the natural-scroll setting. + // + // To avoid scrolling through workspaces really fast, you can use + // the cooldown-ms property. The bind will be rate-limited to this value. + // You can set a cooldown on any bind, but it's most useful for the wheel. + Mod+WheelScrollDown cooldown-ms=150 { focus-workspace-down; } + Mod+WheelScrollUp cooldown-ms=150 { focus-workspace-up; } + Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; } + Mod+Ctrl+WheelScrollUp cooldown-ms=150 { move-column-to-workspace-up; } + + Mod+WheelScrollRight { focus-column-right; } + Mod+WheelScrollLeft { focus-column-left; } + Mod+Ctrl+WheelScrollRight { move-column-right; } + Mod+Ctrl+WheelScrollLeft { move-column-left; } + + // Usually scrolling up and down with Shift in applications results in + // horizontal scrolling; these binds replicate that. + Mod+Shift+WheelScrollDown { focus-column-right; } + Mod+Shift+WheelScrollUp { focus-column-left; } + Mod+Ctrl+Shift+WheelScrollDown { move-column-right; } + Mod+Ctrl+Shift+WheelScrollUp { move-column-left; } + + // Similarly, you can bind touchpad scroll "ticks". + // Touchpad scrolling is continuous, so for these binds it is split into + // discrete intervals. + // These binds are also affected by touchpad's natural-scroll, so these + // example binds are "inverted", since we have natural-scroll enabled for + // touchpads by default. + // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; } + // Mod+TouchpadScrollUp { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; } + + // You can refer to workspaces by index. However, keep in mind that + // niri is a dynamic workspace system, so these commands are kind of + // "best effort". Trying to refer to a workspace index bigger than + // the current workspace count will instead refer to the bottommost + // (empty) workspace. + // + // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on + // will all refer to the 3rd workspace. + Mod+1 { focus-workspace 1; } + Mod+2 { focus-workspace 2; } + Mod+3 { focus-workspace 3; } + Mod+4 { focus-workspace 4; } + Mod+5 { focus-workspace 5; } + Mod+6 { focus-workspace 6; } + Mod+7 { focus-workspace 7; } + Mod+8 { focus-workspace 8; } + Mod+9 { focus-workspace 9; } + Mod+Ctrl+1 { move-column-to-workspace 1; } + Mod+Ctrl+2 { move-column-to-workspace 2; } + Mod+Ctrl+3 { move-column-to-workspace 3; } + Mod+Ctrl+4 { move-column-to-workspace 4; } + Mod+Ctrl+5 { move-column-to-workspace 5; } + Mod+Ctrl+6 { move-column-to-workspace 6; } + Mod+Ctrl+7 { move-column-to-workspace 7; } + Mod+Ctrl+8 { move-column-to-workspace 8; } + Mod+Ctrl+9 { move-column-to-workspace 9; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+1 { move-window-to-workspace 1; } + + // Switches focus between the current and the previous workspace. + // Mod+Tab { focus-workspace-previous; } + + // The following binds move the focused window in and out of a column. + // If the window is alone, they will consume it into the nearby column to the side. + // If the window is already in a column, they will expel it out. + Mod+BracketLeft { consume-or-expel-window-left; } + Mod+BracketRight { consume-or-expel-window-right; } + + // Consume one window from the right to the bottom of the focused column. + Mod+Comma { consume-window-into-column; } + // Expel the bottom window from the focused column to the right. + Mod+Period { expel-window-from-column; } + + Mod+R { switch-preset-column-width; } + // Cycling through the presets in reverse order is also possible. + // Mod+R { switch-preset-column-width-back; } + Mod+Shift+R { switch-preset-window-height; } + Mod+Ctrl+R { reset-window-height; } + Mod+F { maximize-column; } + Mod+Shift+F { fullscreen-window; } + + // Expand the focused column to space not taken up by other fully visible columns. + // Makes the column "fill the rest of the space". + Mod+Ctrl+F { expand-column-to-available-width; } + + Mod+C { center-column; } + + // Center all fully visible columns on screen. + Mod+Ctrl+C { center-visible-columns; } + + // Finer width adjustments. + // This command can also: + // * set width in pixels: "1000" + // * adjust width in pixels: "-5" or "+5" + // * set width as a percentage of screen width: "25%" + // * adjust width as a percentage of screen width: "-10%" or "+10%" + // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0, + // set-column-width "100" will make the column occupy 200 physical screen pixels. + Mod+Minus { set-column-width "-10%"; } + Mod+Equal { set-column-width "+10%"; } + + // Finer height adjustments when in column with other windows. + Mod+Shift+Minus { set-window-height "-10%"; } + Mod+Shift+Equal { set-window-height "+10%"; } + + // Move the focused window between the floating and the tiling layout. + Mod+V { toggle-window-floating; } + Mod+Shift+V { switch-focus-between-floating-and-tiling; } + + // Toggle tabbed column display mode. + // Windows in this column will appear as vertical tabs, + // rather than stacked on top of each other. + Mod+W { toggle-column-tabbed-display; } + + // Actions to switch layouts. + // Note: if you uncomment these, make sure you do NOT have + // a matching layout switch hotkey configured in xkb options above. + // Having both at once on the same hotkey will break the switching, + // since it will switch twice upon pressing the hotkey (once by xkb, once by niri). + // Mod+Space { switch-layout "next"; } + // Mod+Shift+Space { switch-layout "prev"; } + + Print { screenshot; } + Ctrl+Print { screenshot-screen; } + Alt+Print { screenshot-window; } + + // Applications such as remote-desktop clients and software KVM switches may + // request that niri stops processing the keyboard shortcuts defined here + // so they may, for example, forward the key presses as-is to a remote machine. + // It's a good idea to bind an escape hatch to toggle the inhibitor, + // so a buggy application can't hold your session hostage. + // + // The allow-inhibiting=false property can be applied to other binds as well, + // which ensures niri always processes them, even when an inhibitor is active. + Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; } + + // The quit action will show a confirmation dialog to avoid accidental exits. + Mod+Shift+E { quit; } + Ctrl+Alt+Delete { quit; } + + // Powers off the monitors. To turn them back on, do any input like + // moving the mouse or pressing any other key. + Mod+Shift+P { power-off-monitors; } +} + diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index f557175..737550e 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -3,264 +3,11 @@ // Check the wiki for a full description of the configuration: // https://yalter.github.io/niri/Configuration:-Introduction -// Input device configuration. -// Find the full list of options on the wiki: -// https://yalter.github.io/niri/Configuration:-Input -input { - keyboard { - xkb { - // You can set rules, model, layout, variant and options. - // For more information, see xkeyboard-config(7). +include "input.kdl" +include "output.kdl" +include "layout.kdl" +include "binds.kdl" - layout "us,ru" - options "grp:win_space_toggle,caps:escape" - - // If this section is empty, niri will fetch xkb settings - // from org.freedesktop.locale1. You can control these using - // localectl set-x11-keymap. - } - - // Enable numlock on startup, omitting this setting disables it. - numlock - track-layout "window" - } - - // Next sections include libinput settings. - // Omitting settings disables them, or leaves them at their default values. - // All commented-out settings here are examples, not defaults. - touchpad { - // off - tap - // dwt - // dwtp - // drag false - // drag-lock - natural-scroll - // accel-speed 0.2 - // accel-profile "flat" - // scroll-method "two-finger" - // disabled-on-external-mouse - } - - mouse { - // off - // natural-scroll - accel-speed -0.3 - accel-profile "flat" - // scroll-method "no-scroll" - } - - trackpoint { - // off - // natural-scroll - // accel-speed 0.2 - // accel-profile "flat" - // scroll-method "on-button-down" - // scroll-button 273 - // scroll-button-lock - // middle-emulation - } - - // Uncomment this to make the mouse warp to the center of newly focused windows. - // warp-mouse-to-focus - - // Focus windows and outputs automatically when moving the mouse into them. - // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen. - // focus-follows-mouse max-scroll-amount="0%" -} - -// You can configure outputs by their name, which you can find -// by running `niri msg outputs` while inside a niri instance. -// The built-in laptop monitor is usually called "eDP-1". -// Find more information on the wiki: -// https://yalter.github.io/niri/Configuration:-Outputs -// Remember to uncomment the node by removing "/-"! -/-output "eDP-1" { - // Uncomment this line to disable this output. - // off - - // Resolution and, optionally, refresh rate of the output. - // The format is "x" or "x@". - // If the refresh rate is omitted, niri will pick the highest refresh rate - // for the resolution. - // If the mode is omitted altogether or is invalid, niri will pick one automatically. - // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes. - mode "1920x1080@120.030" - - // You can use integer or fractional scale, for example use 1.5 for 150% scale. - scale 2 - - // Transform allows to rotate the output counter-clockwise, valid values are: - // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270. - transform "normal" - - // Position of the output in the global coordinate space. - // This affects directional monitor actions like "focus-monitor-left", and cursor movement. - // The cursor can only move between directly adjacent outputs. - // Output scale and rotation has to be taken into account for positioning: - // outputs are sized in logical, or scaled, pixels. - // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080, - // so to put another output directly adjacent to it on the right, set its x to 1920. - // If the position is unset or results in an overlap, the output is instead placed - // automatically. - position x=1280 y=0 -} - -// Settings that influence how windows are positioned and sized. -// Find more information on the wiki: -// https://yalter.github.io/niri/Configuration:-Layout -layout { - // Set gaps around windows in logical pixels. - gaps 16 - - // When to center a column when changing focus, options are: - // - "never", default behavior, focusing an off-screen column will keep at the left - // or right edge of the screen. - // - "always", the focused column will always be centered. - // - "on-overflow", focusing a column will center it if it doesn't fit - // together with the previously focused column. - center-focused-column "never" - - // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between. - preset-column-widths { - // Proportion sets the width as a fraction of the output width, taking gaps into account. - // For example, you can perfectly fit four windows sized "proportion 0.25" on an output. - // The default preset widths are 1/3, 1/2 and 2/3 of the output. - proportion 0.33333 - proportion 0.5 - proportion 0.66667 - - // Fixed sets the width in logical pixels exactly. - // fixed 1920 - } - - // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between. - // preset-window-heights { } - - // You can change the default width of the new windows. - default-column-width { proportion 0.5; } - // If you leave the brackets empty, the windows themselves will decide their initial width. - // default-column-width {} - - // By default focus ring and border are rendered as a solid background rectangle - // behind windows. That is, they will show up through semitransparent windows. - // This is because windows using client-side decorations can have an arbitrary shape. - // - // If you don't like that, you should uncomment `prefer-no-csd` below. - // Niri will draw focus ring and border *around* windows that agree to omit their - // client-side decorations. - // - // Alternatively, you can override it with a window rule called - // `draw-border-with-background`. - - // You can change how the focus ring looks. - focus-ring { - // Uncomment this line to disable the focus ring. - // off - - // How many logical pixels the ring extends out from the windows. - width 4 - - // Colors can be set in a variety of ways: - // - CSS named colors: "red" - // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa" - // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others. - - // Color of the ring on the active monitor. - active-color "#7fc8ff" - - // Color of the ring on inactive monitors. - // - // The focus ring only draws around the active window, so the only place - // where you can see its inactive-color is on other monitors. - inactive-color "#505050" - - // You can also use gradients. They take precedence over solid colors. - // Gradients are rendered the same as CSS linear-gradient(angle, from, to). - // The angle is the same as in linear-gradient, and is optional, - // defaulting to 180 (top-to-bottom gradient). - // You can use any CSS linear-gradient tool on the web to set these up. - // Changing the color space is also supported, check the wiki for more info. - // - // active-gradient from="#80c8ff" to="#c7ff7f" angle=45 - - // You can also color the gradient relative to the entire view - // of the workspace, rather than relative to just the window itself. - // To do that, set relative-to="workspace-view". - // - // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view" - } - - // You can also add a border. It's similar to the focus ring, but always visible. - border { - // The settings are the same as for the focus ring. - // If you enable the border, you probably want to disable the focus ring. - off - - width 4 - active-color "#ffc87f" - inactive-color "#505050" - - // Color of the border around windows that request your attention. - urgent-color "#9b0000" - - // Gradients can use a few different interpolation color spaces. - // For example, this is a pastel rainbow gradient via in="oklch longer hue". - // - // active-gradient from="#e5989b" to="#ffb4a2" angle=45 relative-to="workspace-view" in="oklch longer hue" - - // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view" - } - - // You can enable drop shadows for windows. - shadow { - // Uncomment the next line to enable shadows. - // on - - // By default, the shadow draws only around its window, and not behind it. - // Uncomment this setting to make the shadow draw behind its window. - // - // Note that niri has no way of knowing about the CSD window corner - // radius. It has to assume that windows have square corners, leading to - // shadow artifacts inside the CSD rounded corners. This setting fixes - // those artifacts. - // - // However, instead you may want to set prefer-no-csd and/or - // geometry-corner-radius. Then, niri will know the corner radius and - // draw the shadow correctly, without having to draw it behind the - // window. These will also remove client-side shadows if the window - // draws any. - // - // draw-behind-window true - - // You can change how shadows look. The values below are in logical - // pixels and match the CSS box-shadow properties. - - // Softness controls the shadow blur radius. - softness 30 - - // Spread expands the shadow. - spread 5 - - // Offset moves the shadow relative to the window. - offset x=0 y=5 - - // You can also change the shadow color and opacity. - color "#0007" - } - - // Struts shrink the area occupied by windows, similarly to layer-shell panels. - // You can think of them as a kind of outer gaps. They are set in logical pixels. - // Left and right struts will cause the next window to the side to always be visible. - // Top and bottom struts will simply add outer gaps in addition to the area occupied by - // layer-shell panels and regular gaps. - struts { - // left 64 - // right 64 - // top 64 - // bottom 64 - } -} // Add lines like this to spawn processes at startup. // Note that running niri as a session supports xdg-desktop-autostart, @@ -346,281 +93,6 @@ window-rule { clip-to-geometry true } -binds { - // Keys consist of modifiers separated by + signs, followed by an XKB key name - // in the end. To find an XKB name for a particular key, you may use a program - // like wev. - // - // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt - // when running as a winit window. - // - // Most actions that you can bind here can also be invoked programmatically with - // `niri msg action do-something`. - - // Mod-Shift-/, which is usually the same as Mod-?, - // shows a list of important hotkeys. - Mod+Shift+Slash { show-hotkey-overlay; } - - // Suggested binds for running programs: terminal, app launcher, screen locker. - Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; } - Mod+D hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; } - Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; } - - // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc. - // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`. - // For example, this is a standard bind to toggle the screen reader (orca). - Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; } - - // Example volume keys mappings for PipeWire & WirePlumber. - // The allow-when-locked=true property makes them work even when the session is locked. - // Using spawn-sh allows to pass multiple arguments together with the command. - // "-l 1.0" limits the volume to 100%. - XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+ -l 1.0"; } - XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; } - XF86AudioMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; } - XF86AudioMicMute allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; } - - // Example media keys mapping using playerctl. - // This will work with any MPRIS-enabled media player. - XF86AudioPlay allow-when-locked=true { spawn-sh "playerctl play-pause"; } - XF86AudioStop allow-when-locked=true { spawn-sh "playerctl stop"; } - XF86AudioPrev allow-when-locked=true { spawn-sh "playerctl previous"; } - XF86AudioNext allow-when-locked=true { spawn-sh "playerctl next"; } - - // Example brightness key mappings for brightnessctl. - // You can use regular spawn with multiple arguments too (to avoid going through "sh"), - // but you need to manually put each argument in separate "" quotes. - XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; } - XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; } - - // Open/close the Overview: a zoomed-out view of workspaces and windows. - // You can also move the mouse into the top-left hot corner, - // or do a four-finger swipe up on a touchpad. - Mod+O repeat=false { toggle-overview; } - - Mod+Q repeat=false { close-window; } - - Mod+Left { focus-column-left; } - Mod+Down { focus-window-down; } - Mod+Up { focus-window-up; } - Mod+Right { focus-column-right; } - Mod+H { focus-column-left; } - Mod+J { focus-window-down; } - Mod+K { focus-window-up; } - Mod+L { focus-column-right; } - - Mod+Ctrl+Left { move-column-left; } - Mod+Ctrl+Down { move-window-down; } - Mod+Ctrl+Up { move-window-up; } - Mod+Ctrl+Right { move-column-right; } - Mod+Ctrl+H { move-column-left; } - Mod+Ctrl+J { move-window-down; } - Mod+Ctrl+K { move-window-up; } - Mod+Ctrl+L { move-column-right; } - - // Alternative commands that move across workspaces when reaching - // the first or last window in a column. - // Mod+J { focus-window-or-workspace-down; } - // Mod+K { focus-window-or-workspace-up; } - // Mod+Ctrl+J { move-window-down-or-to-workspace-down; } - // Mod+Ctrl+K { move-window-up-or-to-workspace-up; } - - Mod+Home { focus-column-first; } - Mod+End { focus-column-last; } - Mod+Ctrl+Home { move-column-to-first; } - Mod+Ctrl+End { move-column-to-last; } - - Mod+Shift+Left { focus-monitor-left; } - Mod+Shift+Down { focus-monitor-down; } - Mod+Shift+Up { focus-monitor-up; } - Mod+Shift+Right { focus-monitor-right; } - Mod+Shift+H { focus-monitor-left; } - Mod+Shift+J { focus-monitor-down; } - Mod+Shift+K { focus-monitor-up; } - Mod+Shift+L { focus-monitor-right; } - - Mod+Shift+Ctrl+Left { move-column-to-monitor-left; } - Mod+Shift+Ctrl+Down { move-column-to-monitor-down; } - Mod+Shift+Ctrl+Up { move-column-to-monitor-up; } - Mod+Shift+Ctrl+Right { move-column-to-monitor-right; } - Mod+Shift+Ctrl+H { move-column-to-monitor-left; } - Mod+Shift+Ctrl+J { move-column-to-monitor-down; } - Mod+Shift+Ctrl+K { move-column-to-monitor-up; } - Mod+Shift+Ctrl+L { move-column-to-monitor-right; } - - // Alternatively, there are commands to move just a single window: - // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; } - // ... - - // And you can also move a whole workspace to another monitor: - // Mod+Shift+Ctrl+Left { move-workspace-to-monitor-left; } - // ... - - Mod+Page_Down { focus-workspace-down; } - Mod+Page_Up { focus-workspace-up; } - Mod+U { focus-workspace-down; } - Mod+I { focus-workspace-up; } - Mod+Ctrl+Page_Down { move-column-to-workspace-down; } - Mod+Ctrl+Page_Up { move-column-to-workspace-up; } - Mod+Ctrl+U { move-column-to-workspace-down; } - Mod+Ctrl+I { move-column-to-workspace-up; } - - // Alternatively, there are commands to move just a single window: - // Mod+Ctrl+Page_Down { move-window-to-workspace-down; } - // ... - - Mod+Shift+Page_Down { move-workspace-down; } - Mod+Shift+Page_Up { move-workspace-up; } - Mod+Shift+U { move-workspace-down; } - Mod+Shift+I { move-workspace-up; } - - // You can bind mouse wheel scroll ticks using the following syntax. - // These binds will change direction based on the natural-scroll setting. - // - // To avoid scrolling through workspaces really fast, you can use - // the cooldown-ms property. The bind will be rate-limited to this value. - // You can set a cooldown on any bind, but it's most useful for the wheel. - Mod+WheelScrollDown cooldown-ms=150 { focus-workspace-down; } - Mod+WheelScrollUp cooldown-ms=150 { focus-workspace-up; } - Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; } - Mod+Ctrl+WheelScrollUp cooldown-ms=150 { move-column-to-workspace-up; } - - Mod+WheelScrollRight { focus-column-right; } - Mod+WheelScrollLeft { focus-column-left; } - Mod+Ctrl+WheelScrollRight { move-column-right; } - Mod+Ctrl+WheelScrollLeft { move-column-left; } - - // Usually scrolling up and down with Shift in applications results in - // horizontal scrolling; these binds replicate that. - Mod+Shift+WheelScrollDown { focus-column-right; } - Mod+Shift+WheelScrollUp { focus-column-left; } - Mod+Ctrl+Shift+WheelScrollDown { move-column-right; } - Mod+Ctrl+Shift+WheelScrollUp { move-column-left; } - - // Similarly, you can bind touchpad scroll "ticks". - // Touchpad scrolling is continuous, so for these binds it is split into - // discrete intervals. - // These binds are also affected by touchpad's natural-scroll, so these - // example binds are "inverted", since we have natural-scroll enabled for - // touchpads by default. - // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; } - // Mod+TouchpadScrollUp { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; } - - // You can refer to workspaces by index. However, keep in mind that - // niri is a dynamic workspace system, so these commands are kind of - // "best effort". Trying to refer to a workspace index bigger than - // the current workspace count will instead refer to the bottommost - // (empty) workspace. - // - // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on - // will all refer to the 3rd workspace. - Mod+1 { focus-workspace 1; } - Mod+2 { focus-workspace 2; } - Mod+3 { focus-workspace 3; } - Mod+4 { focus-workspace 4; } - Mod+5 { focus-workspace 5; } - Mod+6 { focus-workspace 6; } - Mod+7 { focus-workspace 7; } - Mod+8 { focus-workspace 8; } - Mod+9 { focus-workspace 9; } - Mod+Ctrl+1 { move-column-to-workspace 1; } - Mod+Ctrl+2 { move-column-to-workspace 2; } - Mod+Ctrl+3 { move-column-to-workspace 3; } - Mod+Ctrl+4 { move-column-to-workspace 4; } - Mod+Ctrl+5 { move-column-to-workspace 5; } - Mod+Ctrl+6 { move-column-to-workspace 6; } - Mod+Ctrl+7 { move-column-to-workspace 7; } - Mod+Ctrl+8 { move-column-to-workspace 8; } - Mod+Ctrl+9 { move-column-to-workspace 9; } - - // Alternatively, there are commands to move just a single window: - // Mod+Ctrl+1 { move-window-to-workspace 1; } - - // Switches focus between the current and the previous workspace. - // Mod+Tab { focus-workspace-previous; } - - // The following binds move the focused window in and out of a column. - // If the window is alone, they will consume it into the nearby column to the side. - // If the window is already in a column, they will expel it out. - Mod+BracketLeft { consume-or-expel-window-left; } - Mod+BracketRight { consume-or-expel-window-right; } - - // Consume one window from the right to the bottom of the focused column. - Mod+Comma { consume-window-into-column; } - // Expel the bottom window from the focused column to the right. - Mod+Period { expel-window-from-column; } - - Mod+R { switch-preset-column-width; } - // Cycling through the presets in reverse order is also possible. - // Mod+R { switch-preset-column-width-back; } - Mod+Shift+R { switch-preset-window-height; } - Mod+Ctrl+R { reset-window-height; } - Mod+F { maximize-column; } - Mod+Shift+F { fullscreen-window; } - - // Expand the focused column to space not taken up by other fully visible columns. - // Makes the column "fill the rest of the space". - Mod+Ctrl+F { expand-column-to-available-width; } - - Mod+C { center-column; } - - // Center all fully visible columns on screen. - Mod+Ctrl+C { center-visible-columns; } - - // Finer width adjustments. - // This command can also: - // * set width in pixels: "1000" - // * adjust width in pixels: "-5" or "+5" - // * set width as a percentage of screen width: "25%" - // * adjust width as a percentage of screen width: "-10%" or "+10%" - // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0, - // set-column-width "100" will make the column occupy 200 physical screen pixels. - Mod+Minus { set-column-width "-10%"; } - Mod+Equal { set-column-width "+10%"; } - - // Finer height adjustments when in column with other windows. - Mod+Shift+Minus { set-window-height "-10%"; } - Mod+Shift+Equal { set-window-height "+10%"; } - - // Move the focused window between the floating and the tiling layout. - Mod+V { toggle-window-floating; } - Mod+Shift+V { switch-focus-between-floating-and-tiling; } - - // Toggle tabbed column display mode. - // Windows in this column will appear as vertical tabs, - // rather than stacked on top of each other. - Mod+W { toggle-column-tabbed-display; } - - // Actions to switch layouts. - // Note: if you uncomment these, make sure you do NOT have - // a matching layout switch hotkey configured in xkb options above. - // Having both at once on the same hotkey will break the switching, - // since it will switch twice upon pressing the hotkey (once by xkb, once by niri). - // Mod+Space { switch-layout "next"; } - // Mod+Shift+Space { switch-layout "prev"; } - - Print { screenshot; } - Ctrl+Print { screenshot-screen; } - Alt+Print { screenshot-window; } - - // Applications such as remote-desktop clients and software KVM switches may - // request that niri stops processing the keyboard shortcuts defined here - // so they may, for example, forward the key presses as-is to a remote machine. - // It's a good idea to bind an escape hatch to toggle the inhibitor, - // so a buggy application can't hold your session hostage. - // - // The allow-inhibiting=false property can be applied to other binds as well, - // which ensures niri always processes them, even when an inhibitor is active. - Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; } - - // The quit action will show a confirmation dialog to avoid accidental exits. - Mod+Shift+E { quit; } - Ctrl+Alt+Delete { quit; } - - // Powers off the monitors. To turn them back on, do any input like - // moving the mouse or pressing any other key. - Mod+Shift+P { power-off-monitors; } -} cursor { xcursor-theme "breeze_cursors" diff --git a/.config/niri/input.kdl b/.config/niri/input.kdl new file mode 100644 index 0000000..b6cdc7e --- /dev/null +++ b/.config/niri/input.kdl @@ -0,0 +1,66 @@ +// Input device configuration. +// Find the full list of options on the wiki: +// https://yalter.github.io/niri/Configuration:-Input +input { + keyboard { + xkb { + // You can set rules, model, layout, variant and options. + // For more information, see xkeyboard-config(7). + + layout "us,ru" + options "grp:win_space_toggle,caps:escape" + + // If this section is empty, niri will fetch xkb settings + // from org.freedesktop.locale1. You can control these using + // localectl set-x11-keymap. + } + + // Enable numlock on startup, omitting this setting disables it. + numlock + track-layout "window" + } + + // Next sections include libinput settings. + // Omitting settings disables them, or leaves them at their default values. + // All commented-out settings here are examples, not defaults. + touchpad { + // off + tap + // dwt + // dwtp + // drag false + // drag-lock + natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "two-finger" + // disabled-on-external-mouse + } + + mouse { + // off + // natural-scroll + accel-speed -0.3 + accel-profile "flat" + // scroll-method "no-scroll" + } + + trackpoint { + // off + // natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "on-button-down" + // scroll-button 273 + // scroll-button-lock + // middle-emulation + } + + // Uncomment this to make the mouse warp to the center of newly focused windows. + // warp-mouse-to-focus + + // Focus windows and outputs automatically when moving the mouse into them. + // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen. + // focus-follows-mouse max-scroll-amount="0%" +} + diff --git a/.config/niri/layout.kdl b/.config/niri/layout.kdl new file mode 100644 index 0000000..646ee56 --- /dev/null +++ b/.config/niri/layout.kdl @@ -0,0 +1,156 @@ +// Settings that influence how windows are positioned and sized. +// Find more information on the wiki: +// https://yalter.github.io/niri/Configuration:-Layout +layout { + // Set gaps around windows in logical pixels. + gaps 16 + + // When to center a column when changing focus, options are: + // - "never", default behavior, focusing an off-screen column will keep at the left + // or right edge of the screen. + // - "always", the focused column will always be centered. + // - "on-overflow", focusing a column will center it if it doesn't fit + // together with the previously focused column. + center-focused-column "never" + + // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between. + preset-column-widths { + // Proportion sets the width as a fraction of the output width, taking gaps into account. + // For example, you can perfectly fit four windows sized "proportion 0.25" on an output. + // The default preset widths are 1/3, 1/2 and 2/3 of the output. + proportion 0.33333 + proportion 0.5 + proportion 0.66667 + + // Fixed sets the width in logical pixels exactly. + // fixed 1920 + } + + // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between. + // preset-window-heights { } + + // You can change the default width of the new windows. + default-column-width { proportion 0.5; } + // If you leave the brackets empty, the windows themselves will decide their initial width. + // default-column-width {} + + // By default focus ring and border are rendered as a solid background rectangle + // behind windows. That is, they will show up through semitransparent windows. + // This is because windows using client-side decorations can have an arbitrary shape. + // + // If you don't like that, you should uncomment `prefer-no-csd` below. + // Niri will draw focus ring and border *around* windows that agree to omit their + // client-side decorations. + // + // Alternatively, you can override it with a window rule called + // `draw-border-with-background`. + + // You can change how the focus ring looks. + focus-ring { + // Uncomment this line to disable the focus ring. + // off + + // How many logical pixels the ring extends out from the windows. + width 4 + + // Colors can be set in a variety of ways: + // - CSS named colors: "red" + // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa" + // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others. + + // Color of the ring on the active monitor. + active-color "#7fc8ff" + + // Color of the ring on inactive monitors. + // + // The focus ring only draws around the active window, so the only place + // where you can see its inactive-color is on other monitors. + inactive-color "#505050" + + // You can also use gradients. They take precedence over solid colors. + // Gradients are rendered the same as CSS linear-gradient(angle, from, to). + // The angle is the same as in linear-gradient, and is optional, + // defaulting to 180 (top-to-bottom gradient). + // You can use any CSS linear-gradient tool on the web to set these up. + // Changing the color space is also supported, check the wiki for more info. + // + // active-gradient from="#80c8ff" to="#c7ff7f" angle=45 + + // You can also color the gradient relative to the entire view + // of the workspace, rather than relative to just the window itself. + // To do that, set relative-to="workspace-view". + // + // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view" + } + + // You can also add a border. It's similar to the focus ring, but always visible. + border { + // The settings are the same as for the focus ring. + // If you enable the border, you probably want to disable the focus ring. + off + + width 4 + active-color "#ffc87f" + inactive-color "#505050" + + // Color of the border around windows that request your attention. + urgent-color "#9b0000" + + // Gradients can use a few different interpolation color spaces. + // For example, this is a pastel rainbow gradient via in="oklch longer hue". + // + // active-gradient from="#e5989b" to="#ffb4a2" angle=45 relative-to="workspace-view" in="oklch longer hue" + + // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view" + } + + // You can enable drop shadows for windows. + shadow { + // Uncomment the next line to enable shadows. + // on + + // By default, the shadow draws only around its window, and not behind it. + // Uncomment this setting to make the shadow draw behind its window. + // + // Note that niri has no way of knowing about the CSD window corner + // radius. It has to assume that windows have square corners, leading to + // shadow artifacts inside the CSD rounded corners. This setting fixes + // those artifacts. + // + // However, instead you may want to set prefer-no-csd and/or + // geometry-corner-radius. Then, niri will know the corner radius and + // draw the shadow correctly, without having to draw it behind the + // window. These will also remove client-side shadows if the window + // draws any. + // + // draw-behind-window true + + // You can change how shadows look. The values below are in logical + // pixels and match the CSS box-shadow properties. + + // Softness controls the shadow blur radius. + softness 30 + + // Spread expands the shadow. + spread 5 + + // Offset moves the shadow relative to the window. + offset x=0 y=5 + + // You can also change the shadow color and opacity. + color "#0007" + } + + // Struts shrink the area occupied by windows, similarly to layer-shell panels. + // You can think of them as a kind of outer gaps. They are set in logical pixels. + // Left and right struts will cause the next window to the side to always be visible. + // Top and bottom struts will simply add outer gaps in addition to the area occupied by + // layer-shell panels and regular gaps. + struts { + // left 64 + // right 64 + // top 64 + // bottom 64 + } +} + diff --git a/.config/niri/output.kdl b/.config/niri/output.kdl new file mode 100644 index 0000000..d0355e8 --- /dev/null +++ b/.config/niri/output.kdl @@ -0,0 +1,37 @@ +// You can configure outputs by their name, which you can find +// by running `niri msg outputs` while inside a niri instance. +// The built-in laptop monitor is usually called "eDP-1". +// Find more information on the wiki: +// https://yalter.github.io/niri/Configuration:-Outputs +// Remember to uncomment the node by removing "/-"! +/-output "eDP-1" { + // Uncomment this line to disable this output. + // off + + // Resolution and, optionally, refresh rate of the output. + // The format is "x" or "x@". + // If the refresh rate is omitted, niri will pick the highest refresh rate + // for the resolution. + // If the mode is omitted altogether or is invalid, niri will pick one automatically. + // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes. + mode "1920x1080@120.030" + + // You can use integer or fractional scale, for example use 1.5 for 150% scale. + scale 2 + + // Transform allows to rotate the output counter-clockwise, valid values are: + // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270. + transform "normal" + + // Position of the output in the global coordinate space. + // This affects directional monitor actions like "focus-monitor-left", and cursor movement. + // The cursor can only move between directly adjacent outputs. + // Output scale and rotation has to be taken into account for positioning: + // outputs are sized in logical, or scaled, pixels. + // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080, + // so to put another output directly adjacent to it on the right, set its x to 1920. + // If the position is unset or results in an overlap, the output is instead placed + // automatically. + position x=1280 y=0 +} + -- cgit v1.3 From 85c305c6488b56f60fce44710bce0e06a20b6b93 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 8 Dec 2025 23:58:31 +0300 Subject: [niri] Set prefer-no-csd --- .config/niri/config.kdl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 737550e..8e1a488 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -30,7 +30,7 @@ hotkey-overlay { // Additionally, clients will be informed that they are tiled, removing some client-side rounded corners. // This option will also fix border/focus ring drawing behind some semitransparent windows. // After enabling or disabling this, you need to restart the apps for this to take effect. -// prefer-no-csd +prefer-no-csd // You can change the path where screenshots are saved. // A ~ at the front will be expanded to the home directory. -- cgit v1.3 From 3598297267a4a288139fa5aa2bdf833f31236053 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 9 Dec 2025 00:02:32 +0300 Subject: [niri] Set rounded windows --- .config/niri/config.kdl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 8e1a488..e91aaef 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -88,7 +88,7 @@ window-rule { // Example: enable rounded corners for all windows. // (This example rule is commented out with a "/-" in front.) -/-window-rule { +window-rule { geometry-corner-radius 12 clip-to-geometry true } -- cgit v1.3 From f15826037ec06e0464ea91b5d618a5523aaf232a Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 9 Dec 2025 00:04:08 +0300 Subject: [niri] Block keepass from screen capture --- .config/niri/config.kdl | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index e91aaef..211f12d 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -74,11 +74,8 @@ window-rule { open-floating true } -// Example: block out two password managers from screen capture. -// (This example rule is commented out with a "/-" in front.) -/-window-rule { +window-rule { match app-id=r#"^org\.keepassxc\.KeePassXC$"# - match app-id=r#"^org\.gnome\.World\.Secrets$"# block-out-from "screen-capture" -- cgit v1.3 From 469f7669b2002ea6378c311297fa5d4c90a02c1d Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 9 Dec 2025 01:16:07 +0300 Subject: [niri] Set some window rules --- .config/niri/config.kdl | 41 +---------------------------------------- .config/niri/windows.kdl | 41 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 40 deletions(-) create mode 100644 .config/niri/windows.kdl (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 211f12d..af12bf8 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -7,6 +7,7 @@ include "input.kdl" include "output.kdl" include "layout.kdl" include "binds.kdl" +include "windows.kdl" // Add lines like this to spawn processes at startup. @@ -51,46 +52,6 @@ animations { // slowdown 3.0 } -// Window rules let you adjust behavior for individual windows. -// Find more information on the wiki: -// https://yalter.github.io/niri/Configuration:-Window-Rules - -// Work around WezTerm's initial configure bug -// by setting an empty default-column-width. -window-rule { - // This regular expression is intentionally made as specific as possible, - // since this is the default config, and we want no false positives. - // You can get away with just app-id="wezterm" if you want. - match app-id=r#"^org\.wezfurlong\.wezterm$"# - default-column-width {} -} - -// Open the Firefox picture-in-picture player as floating by default. -window-rule { - // This app-id regular expression will work for both: - // - host Firefox (app-id is "firefox") - // - Flatpak Firefox (app-id is "org.mozilla.firefox") - match app-id=r#"firefox$"# title="^Picture-in-Picture$" - open-floating true -} - -window-rule { - match app-id=r#"^org\.keepassxc\.KeePassXC$"# - - block-out-from "screen-capture" - - // Use this instead if you want them visible on third-party screenshot tools. - // block-out-from "screencast" -} - -// Example: enable rounded corners for all windows. -// (This example rule is commented out with a "/-" in front.) -window-rule { - geometry-corner-radius 12 - clip-to-geometry true -} - - cursor { xcursor-theme "breeze_cursors" } diff --git a/.config/niri/windows.kdl b/.config/niri/windows.kdl new file mode 100644 index 0000000..5f5b9d4 --- /dev/null +++ b/.config/niri/windows.kdl @@ -0,0 +1,41 @@ +// Window rules let you adjust behavior for individual windows. +// Find more information on the wiki: +// https://yalter.github.io/niri/Configuration:-Window-Rules + +window-rule { + geometry-corner-radius 12 + clip-to-geometry true +} + +// Open the Firefox picture-in-picture player as floating by default. +window-rule { + // This app-id regular expression will work for both: + // - host Firefox (app-id is "firefox") + // - Flatpak Firefox (app-id is "org.mozilla.firefox") + match app-id=r#"firefox$"# title="^Picture-in-Picture$" + + open-floating true + default-floating-position x=32 y=32 relative-to="bottom-right" +} + +window-rule { + match app-id=r#"^org\.keepassxc\.KeePassXC$"# + + block-out-from "screen-capture" +} + +window-rule { + match app-id=r#"^org\.telegram\.desktop$"# + exclude app-id=r#"^org\.telegram\.desktop$"# title="Media viewer" + + default-column-width { + fixed 900 + } +} + +window-rule { + match app-id=r#"^org\.telegram\.desktop$"# title="Media viewer" + + open-floating true +} + -- cgit v1.3 From 95e084fc21006b33155c8a28cbd7f49c02af4192 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 9 Dec 2025 01:19:48 +0300 Subject: [niri] Tweak hotkey overlay --- .config/niri/config.kdl | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index af12bf8..224da3f 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -22,8 +22,8 @@ spawn-at-startup "waybar" // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" hotkey-overlay { - // Uncomment this line to disable the "Important Hotkeys" pop-up at startup. - // skip-at-startup + skip-at-startup + hide-not-bound } // Uncomment this line to ask the clients to omit their client-side decorations if possible. @@ -55,3 +55,4 @@ animations { cursor { xcursor-theme "breeze_cursors" } + -- cgit v1.3 From 27215039533099f2b39f50b2ae626c26d7224683 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 9 Dec 2025 21:06:50 +0300 Subject: [niri] Add dunst to autostart --- .config/niri/config.kdl | 1 + 1 file changed, 1 insertion(+) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 224da3f..2cdf2eb 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -17,6 +17,7 @@ include "windows.kdl" // This line starts waybar, a commonly used bar for Wayland compositors. spawn-at-startup "waybar" +spawn-at-startup "dunst" // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" -- cgit v1.3 From fab661ca6e341ff21fef970ec1b053a16fda3d25 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 9 Dec 2025 21:12:49 +0300 Subject: [niri] Add swaybg to autostart --- .config/niri/config.kdl | 1 + 1 file changed, 1 insertion(+) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 2cdf2eb..a6efef4 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -18,6 +18,7 @@ include "windows.kdl" // This line starts waybar, a commonly used bar for Wayland compositors. spawn-at-startup "waybar" spawn-at-startup "dunst" +spawn-at-startup "swaybg" "--image" "/usr/share/wallpapers/Nuvole/contents/images/5120x2880.png" // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" -- cgit v1.3 From 0f1bec93b70197a918f0885e6e51ebc7084555be Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Sat, 13 Dec 2025 06:37:51 +0300 Subject: [vicinae] Add vicinae config and put add vicinae into niri --- .config/niri/binds.kdl | 2 +- .config/niri/config.kdl | 1 + .config/vicinae/vicinae.json | 24 ++++++++++++++++++++++++ 3 files changed, 26 insertions(+), 1 deletion(-) create mode 100644 .config/vicinae/vicinae.json (limited to '.config/niri/config.kdl') diff --git a/.config/niri/binds.kdl b/.config/niri/binds.kdl index 8bc755d..5656fbe 100644 --- a/.config/niri/binds.kdl +++ b/.config/niri/binds.kdl @@ -15,7 +15,7 @@ binds { // Suggested binds for running programs: terminal, app launcher, screen locker. Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; } - Alt+Space hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; } + Alt+Space hotkey-overlay-title="App menu" { spawn "vicinae" "toggle" ; } Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; } // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc. diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index a6efef4..5e404d7 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -19,6 +19,7 @@ include "windows.kdl" spawn-at-startup "waybar" spawn-at-startup "dunst" spawn-at-startup "swaybg" "--image" "/usr/share/wallpapers/Nuvole/contents/images/5120x2880.png" +spawn-sh-at-startup "vicinae server" // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" diff --git a/.config/vicinae/vicinae.json b/.config/vicinae/vicinae.json new file mode 100644 index 0000000..a8338f3 --- /dev/null +++ b/.config/vicinae/vicinae.json @@ -0,0 +1,24 @@ +{ + "closeOnFocusLoss": true, + "considerPreedit": false, + "faviconService": "twenty", + "font": { + "size": 10.5 + }, + "keybinding": "default", + "keybinds": { + }, + "popToRootOnClose": true, + "rootSearch": { + "searchFiles": false + }, + "theme": { + "iconTheme": "Breeze", + "name": "rose-pine" + }, + "window": { + "csd": true, + "opacity": 0.98, + "rounding": 10 + } +} -- cgit v1.3 From 2dc1605897a7b74be863ca556f24e531d6a78968 Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Sun, 14 Dec 2025 18:02:27 +0300 Subject: [niri] Add gammastep to autostart --- .config/niri/config.kdl | 1 + 1 file changed, 1 insertion(+) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 5e404d7..c50778c 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -20,6 +20,7 @@ spawn-at-startup "waybar" spawn-at-startup "dunst" spawn-at-startup "swaybg" "--image" "/usr/share/wallpapers/Nuvole/contents/images/5120x2880.png" spawn-sh-at-startup "vicinae server" +spawn-sh-at-startup "gammastep" // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" -- cgit v1.3 From 0e309bab5790a87c37100d8ffef073da20285fcf Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Mon, 15 Dec 2025 10:38:38 +0300 Subject: [niri] Refer to wallpaper by symlink in ~/.config --- .config/niri/config.kdl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index c50778c..73e8c66 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -18,9 +18,10 @@ include "windows.kdl" // This line starts waybar, a commonly used bar for Wayland compositors. spawn-at-startup "waybar" spawn-at-startup "dunst" -spawn-at-startup "swaybg" "--image" "/usr/share/wallpapers/Nuvole/contents/images/5120x2880.png" +spawn-sh-at-startup "swaybg --image ~/.config/wallpaper" spawn-sh-at-startup "vicinae server" spawn-sh-at-startup "gammastep" +spawn-at-startup "swayidle -w" // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" -- cgit v1.3 From ffb75b8892c8bdbec39af50d17d1a716b594a9cf Mon Sep 17 00:00:00 2001 From: Pavel Egorov Date: Tue, 16 Dec 2025 04:59:10 +0300 Subject: [systemd] extract waybar, dunst, swaybg and swayidle from niri config into systemd services --- .config/niri/config.kdl | 5 ----- .config/systemd/user/swaybg.service | 12 ++++++++++++ .config/systemd/user/swayidle.service | 12 ++++++++++++ 3 files changed, 24 insertions(+), 5 deletions(-) create mode 100644 .config/systemd/user/swaybg.service create mode 100644 .config/systemd/user/swayidle.service (limited to '.config/niri/config.kdl') diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl index 73e8c66..cc2efef 100644 --- a/.config/niri/config.kdl +++ b/.config/niri/config.kdl @@ -15,13 +15,8 @@ include "windows.kdl" // which may be more convenient to use. // See the binds section below for more spawn examples. -// This line starts waybar, a commonly used bar for Wayland compositors. -spawn-at-startup "waybar" -spawn-at-startup "dunst" -spawn-sh-at-startup "swaybg --image ~/.config/wallpaper" spawn-sh-at-startup "vicinae server" spawn-sh-at-startup "gammastep" -spawn-at-startup "swayidle -w" // To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup: // spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell" diff --git a/.config/systemd/user/swaybg.service b/.config/systemd/user/swaybg.service new file mode 100644 index 0000000..4a7903c --- /dev/null +++ b/.config/systemd/user/swaybg.service @@ -0,0 +1,12 @@ +[Unit] +Description=Wallpaper utility for Wayland +After=graphical-session.target +PartOf=graphical-session.target +Requisite=graphical-session.target + +[Install] +WantedBy=niri.service + +[Service] +ExecStart=/usr/bin/swaybg --image "%h/.config/wallpaper" +Restart=on-failure diff --git a/.config/systemd/user/swayidle.service b/.config/systemd/user/swayidle.service new file mode 100644 index 0000000..3f4397c --- /dev/null +++ b/.config/systemd/user/swayidle.service @@ -0,0 +1,12 @@ +[Unit] +Description=Idle management daemon for Wayland +After=graphical-session.target +PartOf=graphical-session.target +Requisite=graphical-session.target + +[Install] +WantedBy=niri.service + +[Service] +ExecStart=/usr/bin/swayidle -w +Restart=on-failure -- cgit v1.3