15 files changed, 1567 insertions, 0 deletions

diff --git a/.config/dunst/dunstrc b/.config/dunst/dunstrc
new file mode 100644
index 0000000..04ab944
--- /dev/null
+++ b/.config/dunst/dunstrc
@@ -0,0 +1,494 @@
+# See dunst(5) for all configuration options
+
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = none
+
+    ### Geometry ###
+
+    # The width of the window, excluding the frame.
+    # dynamic width from 0 to 300
+    # width = (0, 300)
+    # constant width of 300
+    width = 400
+
+    # The height of a single notification, excluding the frame.
+    # dynamic height from 0 to 300
+    height = (0, 300)
+    # constant height of 300
+    # height = 300
+    # NOTE: Dunst from version 1.11 and older don't support dynamic height
+    #       and the given value is treated as the maximum height
+
+    # Position the notification in the top right corner
+    origin = top-right
+
+    # Offset from the origin
+    # NOTE: Dunst from version 1.11 and older use this alternative notation
+    # offset = 10x50
+    offset = (32, 32)
+
+    # Scale factor. It is auto-detected if value is 0.
+    scale = 0
+
+    # Maximum number of notification (0 means no limit)
+    notification_limit = 20
+
+    # Show how many messages are currently hidden (because of
+    # notification_limit).
+    indicate_hidden = yes
+
+    ### Progress bar ###
+
+    # Turn on the progress bar. It appears when a progress hint is passed with
+    # for example dunstify -h int:value:12
+    progress_bar = true
+
+    # Set the progress bar height. This includes the frame, so make sure
+    # it's at least twice as big as the frame width.
+    progress_bar_height = 8
+
+    # Set the frame width of the progress bar
+    progress_bar_frame_width = 0
+
+    # Set the minimum width for the progress bar
+    progress_bar_min_width = 150
+
+    # Set the maximum width for the progress bar
+    progress_bar_max_width = 300
+
+    # Corner radius for the progress bar. 0 disables rounded corners.
+    progress_bar_corner_radius = 4
+
+    # Define which corners to round when drawing the progress bar. If progress_bar_corner_radius
+    # is set to 0 this option will be ignored.
+    progress_bar_corners = all
+
+    # Corner radius for the icon image.
+    icon_corner_radius = 0
+
+    # Define which corners to round when drawing the icon image. If icon_corner_radius
+    # is set to 0 this option will be ignored.
+    icon_corners = all
+
+    # The transparency of the window. Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.). (X11 only)
+    transparency = 0
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    # If gap_size is greater than 0, this setting will be ignored.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Padding between text and icon.
+    text_icon_padding = 0
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 2
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#aaaaaa"
+
+    # Size of gap to display between notifications - requires a compositor.
+    # If value is greater than 0, separator_height will be ignored and a border
+    # of size frame_width will be drawn around each notification instead.
+    # Click events on gaps do not currently propagate to applications below.
+    gap_size = 16
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort type.
+    # possible values are:
+    #  * id: sort by id
+    #  * urgency_ascending: sort by urgency (low then normal then critical)
+    #  * urgency_descending: sort by urgency (critical then normal then low)
+    #  * update: sort by update (most recent always at the top)
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 120
+
+    ### Text ###
+
+    font = Noto 11
+
+    # The spacing between lines. If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <https://docs.gtk.org/Pango/pango_markup.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %c  category
+    #   %S  stack_tag
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  literal %
+    # Markup is allowed
+    format = "<b>%s</b> (%a)\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = left
+
+    # Vertical alignment of message text and icon.
+    # Possible values are "top", "center" and "bottom".
+    vertical_alignment = center
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = end
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Recursive icon lookup. You can set a single theme, instead of having to
+    # define all lookup paths.
+    enable_recursive_icon_lookup = true
+
+    # Set icon theme (only used for recursive icon lookup)
+    icon_theme = breeze
+    # You can also set multiple icon themes, with the leftmost one being used first.
+    # icon_theme = "Adwaita, breeze"
+
+    # Align icons left/right/top/off
+    icon_position = left
+
+    # Scale small icons up to this size, set to 0 to disable. Helpful
+    # for e.g. small files or high-dpi screens. In case of conflict,
+    # max_icon_size takes precedence over this.
+    min_icon_size = 32
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 128
+
+    # Paths to default icons (only necessary when not using recursive icon lookup)
+    # icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/vicinae dmenu
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/xdg-open
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst (X11 only)
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst (X11 only)
+    class = Dunst
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 12
+
+    # Define which corners to round when drawing the window. If the corner radius
+    # is set to 0 this option will be ignored.
+    #
+    # Comma-separated list of the corners. The accepted corner values are bottom-right,
+    # bottom-left, top-right, top-left, top, bottom, left, right or all.
+    corners = all
+
+    # Ignore the dbus closeNotification message.
+    # Useful to enforce the timeout set by dunst configuration. Without this
+    # parameter, an application may close the notification sent before the
+    # user defined timeout.
+    ignore_dbusclose = false
+
+    ### Wayland ###
+    # These settings are Wayland-specific. They have no effect when using X11
+
+    # Uncomment this if you want to let notifications appear under fullscreen
+    # applications (default: overlay)
+    # layer = top
+
+    # Set this to true to use X11 output on Wayland.
+    force_xwayland = false
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines list of actions for each mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: Invoke the action determined by the action_name rule. If there is no
+    #              such action, open the context menu.
+    # * open_url: If the notification has exactly one url, open it. If there are multiple
+    #             ones, open the context menu.
+    # * close_current: Close current notification.
+    # * remove_current: Remove current notification from history.
+    # * close_all: Close all notifications.
+    # * context: Open context menu for the notification.
+    # * context_all: Open context menu for all notifications.
+    # These values can be strung together for each mouse event, and
+    # will be executed in sequence.
+    mouse_left_click = open_url,close_current
+    mouse_middle_click = context,close_current
+    mouse_right_click = close_all
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    background = "#222222"
+    foreground = "#888888"
+    timeout = 10
+    default_icon = dialog-information
+
+[urgency_normal]
+    background = "#285577"
+    foreground = "#ffffff"
+    timeout = 10
+    override_pause_level = 30
+    default_icon = dialog-information
+
+[urgency_critical]
+    background = "#900000"
+    foreground = "#ffffff"
+    frame_color = "#ff0000"
+    timeout = 0
+    override_pause_level = 60
+    default_icon = dialog-warning
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+#    background
+#    foreground
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    set_category
+#    timeout
+#    urgency
+#    icon_position
+#    skip_display
+#    history_ignore
+#    action_name
+#    word_wrap
+#    ellipsize
+#    alignment
+#    hide_text
+#    override_pause_level
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# You can also allow a notification to appear even when paused. Notification will appear whenever notification's override_pause_level >= dunst's paused level.
+# This can be used to set partial pause modes, where more urgent notifications get through, but less urgent stay paused. To do that, you can override the following in the rules:
+# override_pause_level = X
+
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    skip_display = true
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+#[stack-volumes]
+#    appname = "some_volume_notifiers"
+#    set_stack_tag = "volume"
+#
+# vim: ft=cfg
diff --git a/.config/gammastep/config.ini b/.config/gammastep/config.ini
new file mode 100644
index 0000000..b3baa1f
--- /dev/null
+++ b/.config/gammastep/config.ini
@@ -0,0 +1,73 @@
+; Global settings
+[general]
+; Set the day and night screen temperatures
+temp-day=5700
+temp-night=4500
+
+; Disable the smooth fade between temperatures when Redshift starts and stops.
+; 0 will cause an immediate change between screen temperatures.
+; 1 will gradually apply the new screen temperature over a couple of seconds.
+fade=1
+
+; Solar elevation thresholds.
+; By default, Redshift will use the current elevation of the sun to determine
+; whether it is daytime, night or in transition (dawn/dusk). When the sun is
+; above the degrees specified with elevation-high it is considered daytime and
+; below elevation-low it is considered night.
+;elevation-high=3
+;elevation-low=-6
+
+; Custom dawn/dusk intervals.
+; Instead of using the solar elevation, the time intervals of dawn and dusk
+; can be specified manually. The times must be specified as HH:MM in 24-hour
+; format.
+;dawn-time=6:00-7:45
+;dusk-time=18:35-20:15
+
+; Set the screen brightness. Default is 1.0.
+;brightness=0.9
+; It is also possible to use different settings for day and night
+; since version 1.8.
+;brightness-day=0.7
+;brightness-night=0.4
+; Set the screen gamma (for all colors, or each color channel
+; individually)
+; gamma=0.8
+;gamma=0.8:0.7:0.8
+; This can also be set individually for day and night since
+; version 1.10.
+;gamma-day=0.8:0.7:0.8
+;gamma-night=0.6
+
+; Set the location-provider: 'geoclue2', 'manual'.
+; The location provider settings are in a different section.
+location-provider=manual
+
+; Set the adjustment-method: 'randr', 'vidmode', 'drm', 'wayland'.
+; 'randr' is the preferred X11 method, 'vidmode' is an older API
+; that works in some cases when 'randr' does not.
+; The adjustment method settings are in a different section.
+adjustment-method=wayland
+
+; Configuration of the location-provider:
+; type 'gammastep -l PROVIDER:help' to see the settings.
+; ex: 'gammastep -l manual:help'
+; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
+; are negative numbers.
+[manual]
+; 60.03,30.4 Sosnovka park
+lat=60.03
+lon=30.4
+
+; Configuration of the adjustment-method
+; type 'gammastep -m METHOD:help' to see the settings.
+; ex: 'gammastep -m randr:help'
+; In this example, randr is configured to adjust only screen 0.
+; Note that the numbering starts from 0, so this is actually the first screen.
+; If this option is not specified, Redshift will try to adjust _all_ screens.
+[randr]
+screen=0
+
+; In this example, wayland is configured to match outputs based on their name.
+[wayland]
+# output=eDP-*
diff --git a/.config/hypr/hyprlock.conf b/.config/hypr/hyprlock.conf
new file mode 100644
index 0000000..03f6a6d
--- /dev/null
+++ b/.config/hypr/hyprlock.conf
@@ -0,0 +1,61 @@
+general {
+    hide_cursor = true
+    ignore_empty_input = true
+}
+
+background {
+    path = ~/.config/wallpaper
+    blur_passes = 1
+    blur_size = 5
+}
+
+input-field {
+    hide_input = false
+    fade_on_empty = false
+    shadow_passes = 2
+    shadow_size = 5
+    outline_thickness = 1
+    size = 300, 50
+    rounding = 10
+    outer_color = rgb(238, 238, 238)
+    inner_color = rgb(40, 40, 46)
+    font_color = rgb(238, 238, 238)
+    check_color = rgb(236, 198, 156)
+}
+
+# Time
+label {
+    text = cmd[update:1000] echo "<span>$(date +%R)</span>"
+    color = rgb(238, 238, 238)
+    font_size = 50
+    shadow_passes = 1
+    valign = top
+    position = 0, -200
+}
+
+# Date
+label {
+    text = cmd[update:1000] echo "<span>$(date +'%A, %d %B %Y')</span>"
+    color = rgb(238, 238, 238)
+    font_size = 20
+    shadow_passes = 1
+    valign = top
+    position = 0, -300
+}
+
+label {
+    text = $USER
+    color = rgb(238, 238, 238)
+    font_size = 20
+    position = 0, 75
+    shadow_passes = 1
+}
+
+label {
+    text = cmd[] fortune goedel -s
+    color = rgb(238, 238, 238)
+    shadow_passes = 1
+    font_size = 14
+    valign = bottom
+    position = 0, 50
+}
diff --git a/.config/niri/binds.kdl b/.config/niri/binds.kdl
new file mode 100644
index 0000000..28b8ac6
--- /dev/null
+++ b/.config/niri/binds.kdl
@@ -0,0 +1,275 @@
+binds {
+    // Keys consist of modifiers separated by + signs, followed by an XKB key name
+    // in the end. To find an XKB name for a particular key, you may use a program
+    // like wev.
+    //
+    // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+    // when running as a winit window.
+    //
+    // Most actions that you can bind here can also be invoked programmatically with
+    // `niri msg action do-something`.
+
+    // Mod-Shift-/, which is usually the same as Mod-?,
+    // shows a list of important hotkeys.
+    Mod+Shift+Slash { show-hotkey-overlay; }
+
+    // Suggested binds for running programs: terminal, app launcher, screen locker.
+    Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; }
+    Alt+Space hotkey-overlay-title="App menu" { spawn "vicinae" "toggle" ; }
+    Super+Alt+L hotkey-overlay-title="Lock the Screen" { spawn "loginctl" "lock-session"; }
+
+    // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc.
+    // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`.
+    // For example, this is a standard bind to toggle the screen reader (orca).
+    Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; }
+
+    // Example volume keys mappings for PipeWire & WirePlumber.
+    // The allow-when-locked=true property makes them work even when the session is locked.
+    // Using spawn-sh allows to pass multiple arguments together with the command.
+    // "-l 1.0" limits the volume to 100%.
+    XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.05+ -l 1.0"; }
+    XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.05-"; }
+    XF86AudioMute        allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; }
+    XF86AudioMicMute     allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; }
+
+    // Example media keys mapping using playerctl.
+    // This will work with any MPRIS-enabled media player.
+    XF86AudioPlay        allow-when-locked=true { spawn-sh "playerctl play-pause"; }
+    XF86AudioStop        allow-when-locked=true { spawn-sh "playerctl stop"; }
+    XF86AudioPrev        allow-when-locked=true { spawn-sh "playerctl previous"; }
+    XF86AudioNext        allow-when-locked=true { spawn-sh "playerctl next"; }
+
+    // Example brightness key mappings for brightnessctl.
+    // You can use regular spawn with multiple arguments too (to avoid going through "sh"),
+    // but you need to manually put each argument in separate "" quotes.
+    XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; }
+    XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; }
+
+    // Open/close the Overview: a zoomed-out view of workspaces and windows.
+    // You can also move the mouse into the top-left hot corner,
+    // or do a four-finger swipe up on a touchpad.
+    Mod+O repeat=false { toggle-overview; }
+
+    Mod+D repeat=false { close-window; }
+
+    Mod+Left  { focus-column-left; }
+    Mod+Down  { focus-window-down; }
+    Mod+Up    { focus-window-up; }
+    Mod+Right { focus-column-right; }
+    Mod+H     { focus-column-left; }
+    Mod+J     { focus-window-down; }
+    Mod+K     { focus-window-up; }
+    Mod+L     { focus-column-right; }
+
+    Mod+Ctrl+Left  { move-column-left; }
+    Mod+Ctrl+Down  { move-window-down; }
+    Mod+Ctrl+Up    { move-window-up; }
+    Mod+Ctrl+Right { move-column-right; }
+    Mod+Ctrl+H     { move-column-left; }
+    Mod+Ctrl+J     { move-window-down; }
+    Mod+Ctrl+K     { move-window-up; }
+    Mod+Ctrl+L     { move-column-right; }
+
+    // Alternative commands that move across workspaces when reaching
+    // the first or last window in a column.
+    // Mod+J     { focus-window-or-workspace-down; }
+    // Mod+K     { focus-window-or-workspace-up; }
+    // Mod+Ctrl+J     { move-window-down-or-to-workspace-down; }
+    // Mod+Ctrl+K     { move-window-up-or-to-workspace-up; }
+
+    Mod+Home { focus-column-first; }
+    Mod+End  { focus-column-last; }
+    Mod+Ctrl+Home { move-column-to-first; }
+    Mod+Ctrl+End  { move-column-to-last; }
+
+    Mod+Shift+Left  { focus-monitor-left; }
+    Mod+Shift+Down  { focus-monitor-down; }
+    Mod+Shift+Up    { focus-monitor-up; }
+    Mod+Shift+Right { focus-monitor-right; }
+    Mod+Shift+H     { focus-monitor-left; }
+    Mod+Shift+J     { focus-monitor-down; }
+    Mod+Shift+K     { focus-monitor-up; }
+    Mod+Shift+L     { focus-monitor-right; }
+
+    Mod+Shift+Ctrl+Left  { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }
+    Mod+Shift+Ctrl+H     { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+L     { move-column-to-monitor-right; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Shift+Ctrl+Left  { move-window-to-monitor-left; }
+    // ...
+
+    // And you can also move a whole workspace to another monitor:
+    // Mod+Shift+Ctrl+Left  { move-workspace-to-monitor-left; }
+    // ...
+
+    Mod+Page_Down      { focus-workspace-down; }
+    Mod+Page_Up        { focus-workspace-up; }
+    Mod+U              { focus-workspace-down; }
+    Mod+I              { focus-workspace-up; }
+    Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+    Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
+    Mod+Ctrl+U         { move-column-to-workspace-down; }
+    Mod+Ctrl+I         { move-column-to-workspace-up; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+    // ...
+
+    Mod+Shift+Page_Down { move-workspace-down; }
+    Mod+Shift+Page_Up   { move-workspace-up; }
+    Mod+Shift+U         { move-workspace-down; }
+    Mod+Shift+I         { move-workspace-up; }
+
+    // You can bind mouse wheel scroll ticks using the following syntax.
+    // These binds will change direction based on the natural-scroll setting.
+    //
+    // To avoid scrolling through workspaces really fast, you can use
+    // the cooldown-ms property. The bind will be rate-limited to this value.
+    // You can set a cooldown on any bind, but it's most useful for the wheel.
+    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
+    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
+    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
+    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }
+
+    Mod+WheelScrollRight      { focus-column-right; }
+    Mod+WheelScrollLeft       { focus-column-left; }
+    Mod+Ctrl+WheelScrollRight { move-column-right; }
+    Mod+Ctrl+WheelScrollLeft  { move-column-left; }
+
+    // Usually scrolling up and down with Shift in applications results in
+    // horizontal scrolling; these binds replicate that.
+    Mod+Shift+WheelScrollDown      { focus-column-right; }
+    Mod+Shift+WheelScrollUp        { focus-column-left; }
+    Mod+Ctrl+Shift+WheelScrollDown { move-column-right; }
+    Mod+Ctrl+Shift+WheelScrollUp   { move-column-left; }
+
+    // Similarly, you can bind touchpad scroll "ticks".
+    // Touchpad scrolling is continuous, so for these binds it is split into
+    // discrete intervals.
+    // These binds are also affected by touchpad's natural-scroll, so these
+    // example binds are "inverted", since we have natural-scroll enabled for
+    // touchpads by default.
+    // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; }
+    // Mod+TouchpadScrollUp   { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; }
+
+    // You can refer to workspaces by index. However, keep in mind that
+    // niri is a dynamic workspace system, so these commands are kind of
+    // "best effort". Trying to refer to a workspace index bigger than
+    // the current workspace count will instead refer to the bottommost
+    // (empty) workspace.
+    //
+    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
+    // will all refer to the 3rd workspace.
+    Mod+1 { focus-workspace 1; }
+    Mod+2 { focus-workspace 2; }
+    Mod+3 { focus-workspace 3; }
+    Mod+4 { focus-workspace 4; }
+    Mod+5 { focus-workspace 5; }
+    Mod+6 { focus-workspace 6; }
+    Mod+7 { focus-workspace 7; }
+    Mod+8 { focus-workspace 8; }
+    Mod+9 { focus-workspace 9; }
+    Mod+Ctrl+1 { move-column-to-workspace 1; }
+    Mod+Ctrl+2 { move-column-to-workspace 2; }
+    Mod+Ctrl+3 { move-column-to-workspace 3; }
+    Mod+Ctrl+4 { move-column-to-workspace 4; }
+    Mod+Ctrl+5 { move-column-to-workspace 5; }
+    Mod+Ctrl+6 { move-column-to-workspace 6; }
+    Mod+Ctrl+7 { move-column-to-workspace 7; }
+    Mod+Ctrl+8 { move-column-to-workspace 8; }
+    Mod+Ctrl+9 { move-column-to-workspace 9; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+    // Switches focus between the current and the previous workspace.
+    // Mod+Tab { focus-workspace-previous; }
+
+    // The following binds move the focused window in and out of a column.
+    // If the window is alone, they will consume it into the nearby column to the side.
+    // If the window is already in a column, they will expel it out.
+    Mod+BracketLeft  { consume-or-expel-window-left; }
+    Mod+BracketRight { consume-or-expel-window-right; }
+
+    // Consume one window from the right to the bottom of the focused column.
+    Mod+Comma  { consume-window-into-column; }
+    // Expel the bottom window from the focused column to the right.
+    Mod+Period { expel-window-from-column; }
+
+    Mod+R { switch-preset-column-width; }
+    // Cycling through the presets in reverse order is also possible.
+    // Mod+R { switch-preset-column-width-back; }
+    Mod+Shift+R { switch-preset-window-height; }
+    Mod+Ctrl+R { reset-window-height; }
+    Mod+F { maximize-column; }
+    Mod+Shift+F { fullscreen-window; }
+
+    // Expand the focused column to space not taken up by other fully visible columns.
+    // Makes the column "fill the rest of the space".
+    Mod+Ctrl+F { expand-column-to-available-width; }
+
+    Mod+C { center-column; }
+
+    // Center all fully visible columns on screen.
+    Mod+Ctrl+C { center-visible-columns; }
+
+    // Finer width adjustments.
+    // This command can also:
+    // * set width in pixels: "1000"
+    // * adjust width in pixels: "-5" or "+5"
+    // * set width as a percentage of screen width: "25%"
+    // * adjust width as a percentage of screen width: "-10%" or "+10%"
+    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+    // set-column-width "100" will make the column occupy 200 physical screen pixels.
+    Mod+Minus { set-column-width "-10%"; }
+    Mod+Equal { set-column-width "+10%"; }
+
+    // Finer height adjustments when in column with other windows.
+    Mod+Shift+Minus { set-window-height "-10%"; }
+    Mod+Shift+Equal { set-window-height "+10%"; }
+
+    // Move the focused window between the floating and the tiling layout.
+    Mod+V       { toggle-window-floating; }
+    Mod+Shift+V { switch-focus-between-floating-and-tiling; }
+
+    // Toggle tabbed column display mode.
+    // Windows in this column will appear as vertical tabs,
+    // rather than stacked on top of each other.
+    Mod+W { toggle-column-tabbed-display; }
+
+    // Actions to switch layouts.
+    // Note: if you uncomment these, make sure you do NOT have
+    // a matching layout switch hotkey configured in xkb options above.
+    // Having both at once on the same hotkey will break the switching,
+    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+    // Mod+Space       { switch-layout "next"; }
+    // Mod+Shift+Space { switch-layout "prev"; }
+
+    Print { screenshot; }
+    Ctrl+Print { screenshot-screen; }
+    Alt+Print { screenshot-window; }
+
+    // Applications such as remote-desktop clients and software KVM switches may
+    // request that niri stops processing the keyboard shortcuts defined here
+    // so they may, for example, forward the key presses as-is to a remote machine.
+    // It's a good idea to bind an escape hatch to toggle the inhibitor,
+    // so a buggy application can't hold your session hostage.
+    //
+    // The allow-inhibiting=false property can be applied to other binds as well,
+    // which ensures niri always processes them, even when an inhibitor is active.
+    Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; }
+
+    // The quit action will show a confirmation dialog to avoid accidental exits.
+    Ctrl+Alt+Delete { quit; }
+
+    // Powers off the monitors. To turn them back on, do any input like
+    // moving the mouse or pressing any other key.
+    Mod+Shift+P { power-off-monitors; }
+}
+
diff --git a/.config/niri/config.kdl b/.config/niri/config.kdl
new file mode 100644
index 0000000..cc2efef
--- /dev/null
+++ b/.config/niri/config.kdl
@@ -0,0 +1,58 @@
+// This config is in the KDL format: https://kdl.dev
+// "/-" comments out the following node.
+// Check the wiki for a full description of the configuration:
+// https://yalter.github.io/niri/Configuration:-Introduction
+
+include "input.kdl"
+include "output.kdl"
+include "layout.kdl"
+include "binds.kdl"
+include "windows.kdl"
+
+
+// Add lines like this to spawn processes at startup.
+// Note that running niri as a session supports xdg-desktop-autostart,
+// which may be more convenient to use.
+// See the binds section below for more spawn examples.
+
+spawn-sh-at-startup "vicinae server"
+spawn-sh-at-startup "gammastep"
+
+// To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup:
+// spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell"
+
+hotkey-overlay {
+    skip-at-startup
+    hide-not-bound
+}
+
+// Uncomment this line to ask the clients to omit their client-side decorations if possible.
+// If the client will specifically ask for CSD, the request will be honored.
+// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners.
+// This option will also fix border/focus ring drawing behind some semitransparent windows.
+// After enabling or disabling this, you need to restart the apps for this to take effect.
+prefer-no-csd
+
+// You can change the path where screenshots are saved.
+// A ~ at the front will be expanded to the home directory.
+// The path is formatted with strftime(3) to give you the screenshot date and time.
+screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Animation settings.
+// The wiki explains how to configure individual animations:
+// https://yalter.github.io/niri/Configuration:-Animations
+animations {
+    // Uncomment to turn off all animations.
+    // off
+
+    // Slow down all animations by this factor. Values below 1 speed them up instead.
+    // slowdown 3.0
+}
+
+cursor {
+    xcursor-theme "breeze_cursors"
+}
+
diff --git a/.config/niri/input.kdl b/.config/niri/input.kdl
new file mode 100644
index 0000000..b6cdc7e
--- /dev/null
+++ b/.config/niri/input.kdl
@@ -0,0 +1,66 @@
+// Input device configuration.
+// Find the full list of options on the wiki:
+// https://yalter.github.io/niri/Configuration:-Input
+input {
+    keyboard {
+        xkb {
+            // You can set rules, model, layout, variant and options.
+            // For more information, see xkeyboard-config(7).
+
+            layout "us,ru"
+            options "grp:win_space_toggle,caps:escape"
+
+            // If this section is empty, niri will fetch xkb settings
+            // from org.freedesktop.locale1. You can control these using
+            // localectl set-x11-keymap.
+        }
+
+        // Enable numlock on startup, omitting this setting disables it.
+        numlock
+        track-layout "window"
+    }
+
+    // Next sections include libinput settings.
+    // Omitting settings disables them, or leaves them at their default values.
+    // All commented-out settings here are examples, not defaults.
+    touchpad {
+        // off
+        tap
+        // dwt
+        // dwtp
+        // drag false
+        // drag-lock
+        natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "two-finger"
+        // disabled-on-external-mouse
+    }
+
+    mouse {
+        // off
+        // natural-scroll
+        accel-speed -0.3
+        accel-profile "flat"
+        // scroll-method "no-scroll"
+    }
+
+    trackpoint {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "on-button-down"
+        // scroll-button 273
+        // scroll-button-lock
+        // middle-emulation
+    }
+
+    // Uncomment this to make the mouse warp to the center of newly focused windows.
+    // warp-mouse-to-focus
+
+    // Focus windows and outputs automatically when moving the mouse into them.
+    // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen.
+    // focus-follows-mouse max-scroll-amount="0%"
+}
+
diff --git a/.config/niri/layout.kdl b/.config/niri/layout.kdl
new file mode 100644
index 0000000..646ee56
--- /dev/null
+++ b/.config/niri/layout.kdl
@@ -0,0 +1,156 @@
+// Settings that influence how windows are positioned and sized.
+// Find more information on the wiki:
+// https://yalter.github.io/niri/Configuration:-Layout
+layout {
+    // Set gaps around windows in logical pixels.
+    gaps 16
+
+    // When to center a column when changing focus, options are:
+    // - "never", default behavior, focusing an off-screen column will keep at the left
+    //   or right edge of the screen.
+    // - "always", the focused column will always be centered.
+    // - "on-overflow", focusing a column will center it if it doesn't fit
+    //   together with the previously focused column.
+    center-focused-column "never"
+
+    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+    preset-column-widths {
+        // Proportion sets the width as a fraction of the output width, taking gaps into account.
+        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+        proportion 0.33333
+        proportion 0.5
+        proportion 0.66667
+
+        // Fixed sets the width in logical pixels exactly.
+        // fixed 1920
+    }
+
+    // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between.
+    // preset-window-heights { }
+
+    // You can change the default width of the new windows.
+    default-column-width { proportion 0.5; }
+    // If you leave the brackets empty, the windows themselves will decide their initial width.
+    // default-column-width {}
+
+    // By default focus ring and border are rendered as a solid background rectangle
+    // behind windows. That is, they will show up through semitransparent windows.
+    // This is because windows using client-side decorations can have an arbitrary shape.
+    //
+    // If you don't like that, you should uncomment `prefer-no-csd` below.
+    // Niri will draw focus ring and border *around* windows that agree to omit their
+    // client-side decorations.
+    //
+    // Alternatively, you can override it with a window rule called
+    // `draw-border-with-background`.
+
+    // You can change how the focus ring looks.
+    focus-ring {
+        // Uncomment this line to disable the focus ring.
+        // off
+
+        // How many logical pixels the ring extends out from the windows.
+        width 4
+
+        // Colors can be set in a variety of ways:
+        // - CSS named colors: "red"
+        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
+        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.
+
+        // Color of the ring on the active monitor.
+        active-color "#7fc8ff"
+
+        // Color of the ring on inactive monitors.
+        //
+        // The focus ring only draws around the active window, so the only place
+        // where you can see its inactive-color is on other monitors.
+        inactive-color "#505050"
+
+        // You can also use gradients. They take precedence over solid colors.
+        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
+        // The angle is the same as in linear-gradient, and is optional,
+        // defaulting to 180 (top-to-bottom gradient).
+        // You can use any CSS linear-gradient tool on the web to set these up.
+        // Changing the color space is also supported, check the wiki for more info.
+        //
+        // active-gradient from="#80c8ff" to="#c7ff7f" angle=45
+
+        // You can also color the gradient relative to the entire view
+        // of the workspace, rather than relative to just the window itself.
+        // To do that, set relative-to="workspace-view".
+        //
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can also add a border. It's similar to the focus ring, but always visible.
+    border {
+        // The settings are the same as for the focus ring.
+        // If you enable the border, you probably want to disable the focus ring.
+        off
+
+        width 4
+        active-color "#ffc87f"
+        inactive-color "#505050"
+
+        // Color of the border around windows that request your attention.
+        urgent-color "#9b0000"
+
+        // Gradients can use a few different interpolation color spaces.
+        // For example, this is a pastel rainbow gradient via in="oklch longer hue".
+        //
+        // active-gradient from="#e5989b" to="#ffb4a2" angle=45 relative-to="workspace-view" in="oklch longer hue"
+
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can enable drop shadows for windows.
+    shadow {
+        // Uncomment the next line to enable shadows.
+        // on
+
+        // By default, the shadow draws only around its window, and not behind it.
+        // Uncomment this setting to make the shadow draw behind its window.
+        //
+        // Note that niri has no way of knowing about the CSD window corner
+        // radius. It has to assume that windows have square corners, leading to
+        // shadow artifacts inside the CSD rounded corners. This setting fixes
+        // those artifacts.
+        //
+        // However, instead you may want to set prefer-no-csd and/or
+        // geometry-corner-radius. Then, niri will know the corner radius and
+        // draw the shadow correctly, without having to draw it behind the
+        // window. These will also remove client-side shadows if the window
+        // draws any.
+        //
+        // draw-behind-window true
+
+        // You can change how shadows look. The values below are in logical
+        // pixels and match the CSS box-shadow properties.
+
+        // Softness controls the shadow blur radius.
+        softness 30
+
+        // Spread expands the shadow.
+        spread 5
+
+        // Offset moves the shadow relative to the window.
+        offset x=0 y=5
+
+        // You can also change the shadow color and opacity.
+        color "#0007"
+    }
+
+    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+    // You can think of them as a kind of outer gaps. They are set in logical pixels.
+    // Left and right struts will cause the next window to the side to always be visible.
+    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+    // layer-shell panels and regular gaps.
+    struts {
+        // left 64
+        // right 64
+        // top 64
+        // bottom 64
+    }
+}
+
diff --git a/.config/niri/output.kdl b/.config/niri/output.kdl
new file mode 100644
index 0000000..d0355e8
--- /dev/null
+++ b/.config/niri/output.kdl
@@ -0,0 +1,37 @@
+// You can configure outputs by their name, which you can find
+// by running `niri msg outputs` while inside a niri instance.
+// The built-in laptop monitor is usually called "eDP-1".
+// Find more information on the wiki:
+// https://yalter.github.io/niri/Configuration:-Outputs
+// Remember to uncomment the node by removing "/-"!
+/-output "eDP-1" {
+    // Uncomment this line to disable this output.
+    // off
+
+    // Resolution and, optionally, refresh rate of the output.
+    // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>".
+    // If the refresh rate is omitted, niri will pick the highest refresh rate
+    // for the resolution.
+    // If the mode is omitted altogether or is invalid, niri will pick one automatically.
+    // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes.
+    mode "[email protected]"
+
+    // You can use integer or fractional scale, for example use 1.5 for 150% scale.
+    scale 2
+
+    // Transform allows to rotate the output counter-clockwise, valid values are:
+    // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270.
+    transform "normal"
+
+    // Position of the output in the global coordinate space.
+    // This affects directional monitor actions like "focus-monitor-left", and cursor movement.
+    // The cursor can only move between directly adjacent outputs.
+    // Output scale and rotation has to be taken into account for positioning:
+    // outputs are sized in logical, or scaled, pixels.
+    // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080,
+    // so to put another output directly adjacent to it on the right, set its x to 1920.
+    // If the position is unset or results in an overlap, the output is instead placed
+    // automatically.
+    position x=1280 y=0
+}
+
diff --git a/.config/niri/windows.kdl b/.config/niri/windows.kdl
new file mode 100644
index 0000000..44410d3
--- /dev/null
+++ b/.config/niri/windows.kdl
@@ -0,0 +1,69 @@
+workspace "main"
+workspace "games"
+
+// Window rules let you adjust behavior for individual windows.
+// Find more information on the wiki:
+// https://yalter.github.io/niri/Configuration:-Window-Rules
+
+window-rule {
+    geometry-corner-radius 12
+    clip-to-geometry true
+}
+
+// Open the Firefox picture-in-picture player as floating by default.
+window-rule {
+    // This app-id regular expression will work for both:
+    // - host Firefox (app-id is "firefox")
+    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
+    match app-id=r#"firefox$"# title="^Picture-in-Picture$"
+
+    open-floating true
+    default-floating-position x=32 y=32 relative-to="bottom-right"
+}
+
+window-rule {
+    match app-id=r#"firefox"# title="Choose User Profile"
+
+    open-floating true
+}
+
+window-rule {
+    match app-id=r#"^org\.keepassxc\.KeePassXC$"#
+
+    block-out-from "screen-capture"
+}
+
+window-rule {
+    match app-id=r#"^org\.telegram\.desktop$"#
+    exclude app-id=r#"^org\.telegram\.desktop$"# title="Media viewer"
+
+    default-column-width {
+        fixed 900
+    }
+}
+
+window-rule {
+    match app-id=r#"^org\.telegram\.desktop$"# title="Media viewer"
+
+    open-floating true
+}
+
+window-rule {
+    match app-id=r#"steam"#
+
+    open-on-workspace "games"
+}
+
+window-rule {
+    match app-id=r#"steam"# title="Steam"
+
+    open-maximized true
+}
+
+window-rule {
+    match app-id=r#"steam"# title="Friends List"
+
+    default-column-width {
+        fixed 500
+    }
+}
diff --git a/.config/swayidle/config b/.config/swayidle/config
new file mode 100644
index 0000000..f77d7ef
--- /dev/null
+++ b/.config/swayidle/config
@@ -0,0 +1,4 @@
+timeout 300 'loginctl lock-session'
+timeout 3600 'systemctl suspend'
+before-sleep 'hyprlock --grace 5'
+lock 'hyprlock'
diff --git a/.config/systemd/user/swaybg.service b/.config/systemd/user/swaybg.service
new file mode 100644
index 0000000..4a7903c
--- /dev/null
+++ b/.config/systemd/user/swaybg.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Wallpaper utility for Wayland
+After=graphical-session.target
+PartOf=graphical-session.target
+Requisite=graphical-session.target
+
+[Install]
+WantedBy=niri.service
+
+[Service]
+ExecStart=/usr/bin/swaybg --image "%h/.config/wallpaper"
+Restart=on-failure
diff --git a/.config/systemd/user/swayidle.service b/.config/systemd/user/swayidle.service
new file mode 100644
index 0000000..3f4397c
--- /dev/null
+++ b/.config/systemd/user/swayidle.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Idle management daemon for Wayland
+After=graphical-session.target
+PartOf=graphical-session.target
+Requisite=graphical-session.target
+
+[Install]
+WantedBy=niri.service
+
+[Service]
+ExecStart=/usr/bin/swayidle -w
+Restart=on-failure
diff --git a/.config/vicinae/vicinae.json b/.config/vicinae/vicinae.json
new file mode 100644
index 0000000..a8338f3
--- /dev/null
+++ b/.config/vicinae/vicinae.json
@@ -0,0 +1,24 @@
+{
+    "closeOnFocusLoss": true,
+    "considerPreedit": false,
+    "faviconService": "twenty",
+    "font": {
+        "size": 10.5
+    },
+    "keybinding": "default",
+    "keybinds": {
+    },
+    "popToRootOnClose": true,
+    "rootSearch": {
+        "searchFiles": false
+    },
+    "theme": {
+        "iconTheme": "Breeze",
+        "name": "rose-pine"
+    },
+    "window": {
+        "csd": true,
+        "opacity": 0.98,
+        "rounding": 10
+    }
+}
diff --git a/.config/waybar/config.jsonc b/.config/waybar/config.jsonc
new file mode 100644
index 0000000..76d5f01
--- /dev/null
+++ b/.config/waybar/config.jsonc
@@ -0,0 +1,124 @@
+// -*- mode: jsonc -*-
+{
+    "layer": "top", // Waybar at top layer
+    "position": "top", // Waybar position (top|bottom|left|right)
+    "height": 32, // Waybar height (to be removed for auto height)
+    // "width": 1280, // Waybar width
+    "spacing": 4, // Gaps between modules (4px)
+    // Choose the order of the modules
+    "modules-left": [
+        "niri/workspaces"
+    ],
+    "modules-center": [
+      "niri/window"
+    ],
+    "modules-right": [
+        "tray",
+        "pulseaudio",
+        // "group/system-status",
+        // "user",
+        "niri/language",
+        "battery",
+        "clock"
+    ],
+    // Modules configuration
+    "niri/workspaces": {
+      "format": "{icon}",
+      "format-icons": {
+        "main": "",
+        "games": "󰊖",
+        "default": ""
+      }
+    },
+    "niri/language": {
+      "format-en": "EN",
+      "format-ru": "RU"
+    },
+    "tray": {
+        // "icon-size": 21,
+        "spacing": 10,
+        // "icons": {
+        //   "blueman": "bluetooth",
+        //   "TelegramDesktop": "$HOME/.local/share/icons/hicolor/16x16/apps/telegram.png"
+        // }
+    },
+    "clock": {
+        "tooltip-format": "<big>{:%Y %B}</big>\n<tt><small>{calendar}</small></tt>",
+        "format": "{:%R}",
+        "format-alt": "{:%F}"
+    },
+    "group/system-status": {
+      "modules": [
+        "network",
+        "memory",
+        "cpu",
+        "temperature"
+      ],
+      "orientation": "inherit",
+      "drawer": {
+      }
+    },
+    "cpu": {
+        "format": "CPU {usage}% {avg_frequency}",
+        "tooltip": false
+    },
+    "memory": {
+        "format": "RAM {percentage}% + {swapPercentage}%"
+    },
+    "user": {
+      "format": "{work_H}:{work_M} Up"
+    },
+    "temperature": {
+        // "thermal-zone": 2,
+        // "hwmon-path": "/sys/class/hwmon/hwmon2/temp1_input",
+        "critical-threshold": 80,
+        // "format-critical": "{temperatureC}°C {icon}",
+        "format": "{temperatureC}°C"
+    },
+    "backlight": {
+        // "device": "acpi_video1",
+        "format": "{percent}% {icon}",
+        "format-icons": ["", "", "", "", "", "", "", "", ""]
+    },
+    "battery": {
+        "states": {
+            // "good": 95,
+            "warning": 30,
+            "critical": 15
+        },
+        "format": "{capacity}% {icon}",
+        "format-full": "{capacity}% {icon}",
+        "format-charging": "{capacity}% ",
+        "format-plugged": "{capacity}% ",
+        "format-alt": "{time} {icon}",
+        // "format-good": "", // An empty format will hide the module
+        // "format-full": "",
+        "format-icons": ["", "", "", "", ""]
+    },
+    "network": {
+        "format-wifi": "{essid} ({signalStrength}%) ",
+        "format-ethernet": "{ipaddr}/{cidr}",
+        "tooltip-format": "{ifname} via {gwaddr}",
+        "format-linked": "{ifname} (No IP)",
+        "format-disconnected": "Disconnected ⚠",
+        "format-alt": "↑ {bandwidthUpBits} ↓ {bandwidthDownBits}"
+    },
+    "pulseaudio": {
+        "scroll-step": 5, // %, can be a float
+        "format": "{volume}% {icon}",
+        "format-bluetooth": "{volume}% {icon}",
+        "format-bluetooth-muted": " {icon} {format_source}",
+        "format-muted": " {format_source}",
+        "format-source-muted": "",
+        "format-icons": {
+            "headphone": "",
+            "hands-free": "",
+            "headset": "",
+            "phone": "",
+            "portable": "",
+            "car": "",
+            "default": ["", "", ""]
+        },
+        "on-click": "pavucontrol"
+    }
+}
diff --git a/.config/waybar/style.css b/.config/waybar/style.css
new file mode 100644
index 0000000..42ecf2b
--- /dev/null
+++ b/.config/waybar/style.css
@@ -0,0 +1,102 @@
+* {
+    font-family: "NotoSans Nerd Font", sans-serif;
+    font-size: 14px;
+    color: rgba(238, 238, 238, 1);
+}
+
+window#waybar {
+    background-color: rgb(40, 40, 46);
+    border-bottom: 1px solid rgba(238, 238, 238, 0.3);
+    transition-property: background-color;
+    transition-duration: .5s;
+}
+
+window#waybar.hidden {
+    opacity: 0.2;
+}
+
+tooltip {
+    background: rgb(40, 40, 46);
+}
+
+tooltip label {
+    padding: 0.2em 0.4em;
+}
+
+button {
+    /* Use box-shadow instead of border so the text isn't offset */
+    box-shadow: inset 0 -3px transparent;
+    /* Avoid rounded borders under each button name */
+    border: none;
+    border-radius: 0;
+}
+
+/* https://github.com/Alexays/Waybar/wiki/FAQ#the-workspace-buttons-have-a-strange-hover-effect */
+button:hover {
+    background: inherit;
+    box-shadow: inset 0 -3px #ffffff;
+}
+
+#workspaces button {
+    padding: 0 5px;
+    background-color: transparent;
+    min-width: 2em;
+}
+
+#workspaces button:hover {
+    background: rgba(0, 0, 0, 0.2);
+}
+
+#workspaces button.focused {
+    color: rgb(150, 145, 238);
+    background-color: rgba(238, 238, 238, 0.2);
+    box-shadow: inset 0 -3px rgb(150, 145, 238);
+}
+
+#workspaces button.urgent {
+    background-color: #eb4d4b;
+}
+
+#mode {
+    background-color: #64727D;
+    box-shadow: inset 0 -3px #ffffff;
+}
+
+window#window {
+    font-family: "JetBrainsMono", monospace;
+}
+
+#clock,
+#battery,
+#cpu,
+#memory,
+#disk,
+#temperature,
+#backlight,
+#network,
+#pulseaudio,
+#wireplumber,
+#custom-media,
+#tray,
+#mode,
+#idle_inhibitor,
+#scratchpad,
+#power-profiles-daemon,
+#mpd {
+    padding: 0 10px;
+}
+
+#window,
+#workspaces {
+    margin: 0 4px;
+}
+
+/* If workspaces is the leftmost module, omit left margin */
+.modules-left > widget:first-child > #workspaces {
+    margin-left: 0;
+}
+
+/* If workspaces is the rightmost module, omit right margin */
+.modules-right > widget:last-child > #workspaces {
+    margin-right: 0;
+}